DSP10

Ordering number : ENN6512 DSP10 Silicon Diffused Junction Type DSP10 Power Rectifier Features Package Dimensions unit : mm 1300 [DSP10] 2.8 Facilitates automatic mounting and miniaturization in end products. Peak reverse voltage : VRM=600V. Average rectified current : IO=1.0A. 1.0 Cathode mark 3.9 1.4 1.8 0.5 1.0 1.0 1.0 1.8 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Peak Reverse Voltage Average Rectified Current Symbol VRM IO Conditions 50Hz sine wave, mounted on an alumina board Load resistor (solder pad size 4mm2!20µmt) Mounted PCB Load resistor (solder pad size 4mm2!20µmt) Mounted PCB Load resistor (solder pad size 4mm2!20µmt) 50Hz sine wave non-repetitive, 1cycle peak value SANYO : SHP Ratings 600 1.0 0.64 0.80 25 150 --55 to +150 Unit V A A A A °C °C Surge Forward Current Junction Temperature Storage Temperature IFSM Tj Tstg Electrical Characteristics at Ta=25°C Parameter Forward Voltage Reverse Current Thremal Resistance Symbol VF IR θi-l θi-a Conditions IF=1.0A VR=VRM Junction-Lead Junction-Ambient, mounted on an alumina board (solder pad size 4mm2!20µmt) Mounted on PCB (solder pad size 4mm2!35µmt) Mounted on PCB (solder pad size 16mm2!35µmt) min typ max 1.1 10 20 108 Unit V µA °C/W °C/W 186 142 °C/W °C/W Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems,...