DTA114T

DTA114E SERIES Bias Resistor Transistor PNP Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base–emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the TO–92 package which is designed for through hole applications. http://onsemi.com Preferred Devices PNP SILICON BIAS RESISTOR TRANSISTOR MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Total Power Dissipation @ TA = 25°C (1.) Derate above 25°C Symbol VCBO VCEO IC PD 350 2.81 mW mW/°C Value 50 50 100 Unit Vdc Vdc mAdc 2 BASE COLLECTOR 3 1 EMITTER THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient (surface mounted) Operating and Storage Temperature Range Maximum Temperature for Soldering Purposes, Time in Solder Bath Symbol RθJA TJ, Tstg TL 260 10 Value 357 –55 to +150 Unit °C/W °C 1 2 3 °C Sec DEVICE MARKING AND RESISTOR VALUES Device DTA114E DTA124E DTA144E DTA114Y DTA114T DTA143T DTB113E DTA123E DTA143E DTA143Z Marking DTA114E DTA124E DTA144E DTA114Y DTA114T DTA143T DTB113E DTA123E DTA143E...