9-Bit D-Type Flip-Flop
74ACT823 9-Bit D-Type Flip-Flop
July 1988 Revised September 2000
74ACT823 9-Bit D-Type Flip-Flop
General Description
T...
Description
74ACT823 9-Bit D-Type Flip-Flop
July 1988 Revised September 2000
74ACT823 9-Bit D-Type Flip-Flop
General Description
The ACT823 is a 9-bit buffered register. It features Clock Enable and Clear which are ideal for parity bus interfacing in high performance microprogramming systems. The ACT823 offers noninverting outputs.
Features
s Outputs source/sink 24 mA s 3-STATE outputs for bus interfacing s Inputs and outputs are on opposite sides s TTL compatible inputs
Ordering Code:
Order Number 74ACT823SC 74ACT823MTC 74ACT823SPC Package Number M24B MTC24 N24C Package Description 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (SPC not available in Tape and Reel.)
Logic Symbols
Connection Diagram
IEEE/IEC
Pin Descriptions
Pin Names D0–D8 O0–O8 OE CLR CP EN Description Data Inputs Data Outputs Output Enable Clear Clock Input Clock Enable
FACT is a trademark of Fairchild Semiconductor Corporation.
© 2000 Fairchild Semiconductor Corporation
DS009894
www.fairchildsemi.com
74ACT823
Functional Description
The ACT823 consists of nine D-type edge-triggered flipflops. These have 3-STATE outputs for bus systems organized with inputs and outputs on opposite sides. The buffered clock (CP) and buffered Output Enab...
Similar Datasheet