Octal buffer
INTEGRATED CIRCUITS
74ALS244A/74ALS244A–1 Octal buffer (3–State)
Product specification IC05 Data Handbook 1991 Feb 08
...
Description
INTEGRATED CIRCUITS
74ALS244A/74ALS244A–1 Octal buffer (3–State)
Product specification IC05 Data Handbook 1991 Feb 08
Philips Semiconductors
Philips Semiconductors
Product specification
Octal buffer (3-State)
74ALS244A/74ALS244A-1
FEATURES
Octal bus interface 3-State buffer outputs sink 24mA and source 15mA The -1 version sinks 48mA
DESCRIPTION
The 74ALS244A is an octal buffer that is ideal for driving bus lines or buffer memory address registers. The outputs are all capable of sinking 24mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two output enables, OEa and OEb, each controlling four of the 3-State outputs. The 74ALS244A-1 sinks 48 mA IOL if the VCC is limited to 5.0V ±0.25V. TYPICAL PROPAGATION DELAY 4.5ns 4.5ns TYPICAL SUPPLY CURRENT (TOTAL) 17mA 17mA
PIN CONFIGURATION
OEa 1 Ia0 2 Yb0 3 Ia1 4 Yb1 5 Ia2 6 Yb2 7 Ia3 8 Yb3 9 GND 10 20 VCC 19 OEb 18 Ya0 17 Ib0 16 Ya1 15 Ib1 14 Ya2 13 Ib2 12 Ya3 11 Ib3
SF00227
ORDERING INFORMATION
ORDER CODE DESCRIPTION COMMERCIAL RANGE VCC = 5V ±10%, Tamb = 0°C to +70°C 74ALS244AN, 74ALS244A-1N 74ALS244AD, 744ALS244A-1D 74ALS244ADB, 74ALS244A-1DB DRAWING NUMBER
TYPE 74ALS244A 74ALS244A-1
20-pin plastic DIP 20-pin plastic SOL 20-pin plastic SSOP Type II
SOT146-1 SOT163-1 SOT339-1
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS Ian, Ibn OEa, OEb Yan, Ybn Yan, Ybn DESCRIPTION Data inputs Output Enable inputs (active-Low) Data outputs Data outputs (-1 version) 74ALS (U....
Similar Datasheet