|
|
SCHOTTKY RECTIFIER. 12CWQ10FN Datasheet |
|
|
|
SCHOTTKY RECTIFIER
Bulletin PD-20548 rev. F 01/03
12CWQ10FN
12 Amp
Major Ratings and Characteristics
Characteristics
12CWQ10FN Units
IF(AV) Rectangular
waveform
VRRM
12
100
IFSM @ tp = 5 µs sine
330
VF @6 Apk, TJ = 125°C
(per leg)
0.65
TJ range
- 55 to 150
A
V
A
V
°C
Description/ Features
D-Pak (TO-252AA)
The 12CWQ10FN surface mount, center tap, Schottky rectifier
series has been designed for applications requiring low forward
drop and small foot prints on PC board. Typical applications are
in disk drives, switching power supplies, converters, free-
wheeling diodes, battery charging, and reverse battery
protection.
Popular D-PAK outline
Center tap configuration
Small foot print, surface mountable
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term reliability
6.73 (0.26)
6.35 (0.25)
5.46 (0.21)
5.21 (0.20)
4
2.38 (0.09)
2.19 (0.08)
1.27 (0.05)
0.88 (0.03)
1.64 (0.02)
6.22 (0.24)
5.97 (0.23)
12 3
10.42 (0.41)
9.40 (0.37)
1.52 (0.06)
1.15 (0.04)
2x 1.14 (0.04)
0.76 (0.03)
2.28 (0.09)
2x
3x 0.89 (0.03)
0.64 (0.02)
4.57 (0.18)
1 - Anode
2 - Cathode
3 - Anode
4 - Cathode
1.14 (0.04)
0.89 (0.03)
0.58 (0.02)
0.46 (0.02)
6.45 (0.24)
5.68 (0.22)
MINIMUM RECOMMENDED FOOTPRINT
5.97 (0.24)
6.48 (0.26)
10.67 (0.42)
0.51 (0.02)
MIN.
2x
2.54 (0.10)
0.58 (0.02)
0.46 (0.02)
1.65 (0.06)
2x
2.28 (0.09)
2x
Base
Common
Cathode
4
Conform to JEDEC outline D-Pak (Similar to TO-252AA)
Dimensions in millimeters and (inches)
www.irf.com
Anode
2
Common
1 Cathode
3
Anode
1
|
12CWQ10FN
Bulletin PD-20548 rev. F 01/03
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
12CWQ10FN
100
Absolute Maximum Ratings
Parameters
12CWQ... Units
Conditions
IF(AV) Max. Average Forward (Per Leg)
Current * See Fig. 5
(Per Device)
IFSM Max.PeakOneCycleNon-Repetitive
Surge Current * See Fig. 7(Per Leg)
EAS Non-Repetit.AvalancheEnergy(PerLeg)
IAR RepetitiveAvalancheCurrent(PerLeg)
6
12
330
110
6
1
A 50% duty cycle @ TC = 135°C, rectangular wave form
5µs Sine or 3µs Rect. pulse Following any rated
A load condition and with
10ms Sine or 6ms Rect. pulse rated VRRM applied
mJ TJ = 25 °C, IAS = 1 Amps, L = 12 mH
A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
12CWQ... Units
Conditions
VFM Max. Forward Voltage Drop
(Per Leg) * See Fig. 1
(1)
IRM Max. Reverse Leakage Current
(Per Leg) * See Fig. 2 (1)
VF(TO) Threshold Voltage
rt Forward Slope Resistance
CT Typ. Junction Capacitance (Per Leg)
LS Typical Series Inductance (Per Leg)
(1) Pulse Width < 300µs, Duty Cycle <2%
0.80
0.95
0.65
0.78
1
4
0.47
20.68
183
5.0
V @ 6A
V @ 12A
TJ = 25 °C
V @ 6A
V @ 12A
TJ = 125 °C
mA TJ = 25 °C
mA TJ = 125 °C
V TJ = TJ max.
mΩ
VR = rated VR
pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
nH Measured lead to lead 5mm from package body
Thermal-Mechanical Specifications
Parameters
12CWQ... Units
Conditions
TJ Max. Junction Temperature Range (*) -55 to 150
Tstg Max. Storage Temperature Range
-55 to 150
RthJC Max. Thermal Resistance (Per Leg)
Junction to Case
(PerDevice)
3.0
1.5
°C
°C
°C/W DCoperation
* See Fig. 4
wt Approximate Weight
0.3 (0.01) g (oz.)
Case Style
D-Pak
Similar to TO-252AA
(*) dPtot
1
< thermal runaway condition for a diode on its own heatsink
dTj Rth( j-a)
2 www.irf.com
|
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |