ISP1107
Advanced Universal Serial Bus transceiver
Rev. 01 — 23 February 2000 Objective specification
1. General descript...
ISP1107
Advanced Universal Serial Bus transceiver
Rev. 01 — 23 February 2000 Objective specification
1. General description
The ISP1107 is a Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 1.1. It is ideal for portable electronics devices such as mobile phones, digital still cameras and personal digital assistants. It allows 1.8 V, 2.5 V and 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical layer of the Universal Serial Bus. It has an integrated 5 V to 3.3 V voltage
regulator allowing direct powering from the USB supply VBUS. The ISP1107 can be used as a USB device transceiver or a USB host transceiver. It can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. The ISP1107 is compatible with the industry-standard Philips Semiconductors USB transceiver PDIUSBP11A.
2. Features
s s s s s s s s s s s s s s Complies with Universal Serial Bus Specification Rev. 1.1 Integrated 5 V to 3.3 V voltage
regulator allowing direct powering from USB VBUS Used as a USB device transceiver or a USB host transceiver Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates Slew-rate controlled differential data driver Differential input receiver with wide common-mode range and very high input sensitivity Stable RCV output during SE0 condition Two single-ended receivers with hysteresis Low-power operation ...