ispGDX120A-7Q160

ispGDX Family TM In-System Programmable Generic Digital Crosspoint Features IN-SYSTEM PROGRAMMABLE GENERIC DIGITAL CROSSPOINT FAMILY — Advanced Architecture Addresses Programmable PCB Interconnect, Bus Interface Integration and Jumper/Switch Replacement — Three Device Options: 80 to 160 Programmable I/O Pins — “Any Input to Any Output” Routing — Fixed HIGH or LOW Output Option for Jumper/DIP Switch Emulation — Space-Saving TQFP, PQFP and BGA Packaging — Dedicated IEEE 1149.1-Compliant Boundary Scan Test — PCI Compliant Output Drive HIGH PERFORMANCE E2CMOS® TECHNOLOGY — 5V Power Supply — 5.0ns Input-to-Output/5.0ns Clock-to-Output Delay — Low-Power: 40mA Quiescent Icc — Balanced 24mA Output Buffers with Programmable Slew Rate Control — Schmitt Trigger Inputs for Noise Immunity — Electrically Erasable and Reprogrammable — Non-Volatile E2CMOS Technology — 100% Tested ispGDX OFFERS THE FOLLOWING ADVANTAGES — In-System Programmable — Lattice ISP or JTAG Programming Interface — Only 5V Power Supply Required — Change Interconnects in Seconds — Reprogram Soldered Devices FLEXIBLE ARCHITECTURE — Combinatorial/Latched/Registered Inputs or Outputs — Individual I/O Tri-state Control with Polarity Control — Dedicated Clock Input Pins (two or four) or Programmable Clocks from I/O Pins (from 20 up to 40) — Up to 4:1 Dynamic Path Selection — Programmable Output Pull-up Resistors — Outputs Tri-state During Power-up (“Live Insertion” Friendly) DESIGN SUPPORT THROUGH LATTICE’S ispGDX...