ispGDX160VA-5B208I

ispGDX 160V/VA TM In-System Programmable 3.3V Generic Digital Crosspoint TM Features IN-SYSTEM PROGRAMMABLE GENERIC DIGITAL CROSSPOINT FAMILY — Advanced Architecture Addresses Programmable PCB Interconnect, Bus Interface Integration and Jumper/Switch Replacement — “Any Input to Any Output” Routing — Fixed HIGH or LOW Output Option for Jumper/DIP Switch Emulation — Space-Saving PQFP and BGA Packaging — Dedicated IEEE 1149.1-Compliant Boundary Scan Test HIGH PERFORMANCE E2CMOS® TECHNOLOGY — 3.3V Core Power Supply — 3.5ns Input-to-Output/3.5ns Clock-to-Output Delay* — 250MHz Maximum Clock Frequency* — TTL/3.3V/2.5V Compatible Input Thresholds and Output Levels (Individually Programmable)* — Low-Power: 16.5mA Quiescent Icc* — 24mA IOL Drive with Programmable Slew Rate Control Option — PCI Compatible Drive Capability* — Schmitt Trigger Inputs for Noise Immunity — Electrically Erasable and Reprogrammable — Non-Volatile E2CMOS Technology ispGDXV™ OFFERS THE FOLLOWING ADVANTAGES — 3.3V In-System Programmable Using Boundary Scan Test Access Port (TAP) — Change Interconnects in Seconds FLEXIBLE ARCHITECTURE — Combinatorial/Latched/Registered Inputs or Outputs — Individual I/O Tri-state Control with Polarity Control — Dedicated Clock/Clock Enable Input Pins (four) or Programmable Clocks/Clock Enables from I/O Pins (40) — Single Level 4:1 Dynamic Path Selection (Tpd = 3.5ns) — Programmable Wide-MUX Cascade Feature Supports up to 16:1 MUX — Programmable Pull-ups, Bus Hold Latch ...