DatasheetsPDF.com

IWD512 Dataheets PDF



Part Number IWD512
Manufacturers Power-One
Logo Power-One
Description IWD SERIES - DUAL OUTPUT/ 10 WATT
Datasheet IWD512 DatasheetIWD512 Datasheet (PDF)

IWD SERIES - DUAL OUTPUT, 10 WATT DESCRIPTION IWD dual output DC/DC converters offer excellent regulation and isolation in an industry-standard package. Available in 5V and 12V input versions, the IWD is perfect for industrial, datacom, or telecom applications. The IWD features short-circuit protection and 500 VDC isolation. Please see the IWS and IAS series for single output applications. FEATURES • • • • Industry Standard Package Industry Standard Pinout 85°C Case Operation Short Circuit Prote.

  IWD512   IWD512


Document
IWD SERIES - DUAL OUTPUT, 10 WATT DESCRIPTION IWD dual output DC/DC converters offer excellent regulation and isolation in an industry-standard package. Available in 5V and 12V input versions, the IWD is perfect for industrial, datacom, or telecom applications. The IWD features short-circuit protection and 500 VDC isolation. Please see the IWS and IAS series for single output applications. FEATURES • • • • Industry Standard Package Industry Standard Pinout 85°C Case Operation Short Circuit Protection • • • • • 5V and 12V Inputs Input Pi Filter 6-Sided Shielding Wide Input Voltage 500V Isolation Efficiency vs. Load (5V Input) 90 85 80 EFFICIENCY % 75 70 65 60 EFF. IWD505 EFF. IWD512 TECHNICAL SPECIFICATIONS Input Voltage Range 5 VDC Nominal 12 VDC Nominal Reflected Ripple Reverse Input Current Output Setpoint Accuracy Line Regulation Vin Min. - Vin Max., Iout Rated Load Regulation Iout Min. - Iout Max., Vin Nom. Minimum Output Current Dynamic Regulation, Loadstep Pk Deviation Settling Time Temperature Coefficient Ripple and Noise, 20 MHz BW Short Circuit Protection 1 Current Limit General Switching Frequency Isolation Input - Output Isolation Resistance - Input to Output Standard Case Operating Range Storage Range Humidity Max., Non-Condensing Vibration, 3 Axes, 5 min each Safety Weight (approx.) REV. 08/30/01 300 kHz 500 VDC 109 Ohms -25 to +85°C -40 to +125°C 95% 5 g, 10 - 55 Hz UL, cUL, TUV 1.4 oz ±1% ±1.0% Vout ±1.0% Vout 10 % Iout Rated 25% Iout 1% Vout 500 µs 0.02%/°C 1% Vout nom. Hiccup 130% 4.5 - 9 VDC 9 - 18 VDC 20% Iin Max. 100% Iin Max. 55 50 10 20 30 40 50 60 70 80 90 100 LOAD % Efficiency vs. Load (12V Input) 90 85 80 EFFICIENCY % 75 70 65 60 55 10 20 30 40 50 60 70 80 90 100 LOAD % EFF. IWD1209 EFF. IWD1212 Notes 1 Converter will auto-restart once fault has been removed. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. 1 IWD SERIES - DUAL OUTPUT, 10 WATT MODELS - (See the last page of section for options.) MODEL INPUT VOLTAGE (VOLTS) INPUT VOLTAGE RANGE (VOLTS) MAXIMUM INPUT CURRENT (AMPS)* OUTPUT VOLTAGE (VOLTS) RATED OUTPUT CURRENT (AMPS) RIPPLE & NOISE pk-pk (mV) TYPICAL EFFICIENCY** IWD505 IWD512 IWD515 IWD1205 IWD1212 IWD1215 NOTES: 5 5 5 12 12 12 4.65 - 5.50 4.65 - 5.50 4.65 - 5.50 10.90 - 13.20 10.90 - 13.20 10.90 - 13.20 3.20 3.20 3.20 1.55 1.55 1.55 ±5 ± 12 ± 15 ±5 ± 12 ± 15 ± 1.000 ± 0.500 ± 0.375 ± 1.000 ± 0.500 ± 0.375 50 120 150 50 120 150 82% 80% 82% 80% 84% 82% * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output. MECHANICAL DRAWING 1.00" (25.4mm) 0.18" MIN. (4.6mm) 0 3 4 5 DIA 0.040" (1.0mm) 2.00" (50.8mm) 0.800"(20.3mm) 1 2 1.40"(35.6mm) 0.800" 0 0.300" 0.500" (20.3mm) -0.10" (7.6mm) (12.7mm) (-2.5mm) 0.400" (10.2mm) 0.40" (10.2mm) BOTTOM VIEW Tolerances Thermal Impedance Natural convection 100 LFM 200 LFM 300 LFM 400 LFM 15.4 °C/W 12.2 °C/W 9.3 °C/W 7.4 °C/W 6.4 °C/W Pin 1 2 3 4 5 Function +Vin -Vin + Vout Common - Vout Inches: .XX ± 0.040 .XXX ± .010 Pin: ± 0.002 Case: + 0.04, - 0.00 (Millimeters) .X ± 1.0 .XX ± 0.25 ± 0.05 Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. + 1.0, - 0.0 (Tolerances as listed unless otherwise specified.) 2 OPTIONS When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. Negative Logic OPTION SUFFIX N T Lucent-Compatible Trim Terminal Strip Trim Enable Trim and Enable Current Share Headerless PIN LENGTH AND HEATSINK OPTIONS TS 1 2 3 4 Y 8 9 1H 1V 2H 2V 3H 3V HAS, HBD, HBS, HES, HLS, LES, QBS, QES, QLS, TES, TQD HAS, HBD, HBS, HES, HLS, QBS, QES, QLS XWS, XWD, XWT IAS, LES IAD, IAS, LES, SMS IAS, LES SMS Encapsulated EWS, IWS, OWS All Units (Except SMS) All Units (Except SMS) All Units (Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) APPLICABLE SERIES TTL “Low” Turns Module ON TTL “High” Turns Module OFF REMARKS 0.110” (2.8mm) Pin Length 0.150” (3.8mm) Pin Length 0.24” (6.1mm) Horizontal Heatsink 0.24” (6.1mm) Vertical Heatsink 0.45” (11.4mm) Horizontal Heatsink 0.45” (11.4mm) Vertical Heatsink 0.95” (24.1mm) Horizontal Heatsink 0.95” (24.1mm) Vertical Heatsink Standard Pin Length is 0.180” (4.6m.


IWD505 IWD512 IWD515


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)