J174

P-Channel JFET Switch CORPORATION J174 – J177 / SST174 – SST177 FEATURES ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) Gate-Drain or Gate-Source Voltage . . . . . . . . . . . . . . . . . 30V Gate Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Storage Temperature Range . . . . . . . . . . . . . -55oC to +150oC Operating Temperature Range . . . . . . . . . . . -55oC to +135oC Lead Temperature (Soldering, 10sec) . . . . . . . . . . . . . . 300oC Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350mW Derate above 25oC . . . . . . . . . . . . . . . . . . . . . . . 3.3mW/ oC NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Low Insertion Loss No Offset or Error Generated By Closed Switch Resistive - Purely - High Isolation Resistance From Driver Short Sample and Hold Aperture Time Fast Switching Switches Analog Choppers Commutators PIN CONFIGURATION APPLICATIONS ORDERING INFORMATION Part SOT-23 G TO-92 Package Temperature Range J174-J177 Plastic TO-92 -55oC to +135oC SST174-SST177 Plastic SOT-23 -55oC to +135oC For Sorted Chips in Carriers see 2N...