CMOS INSTRUMENTATION AMPLIFIER
®
INA
155
INA155
INA
155
For most current data sheet and other product information, visit www.burr-brown.com
Sing...
Description
®
INA
155
INA155
INA
155
For most current data sheet and other product information, visit www.burr-brown.com
Single-Supply, Rail-to-Rail Output, CMOS INSTRUMENTATION AMPLIFIER
FEATURES
q q q q q q q q q q RAIL-TO-RAIL OUTPUT SWING: Within 10mV LOW OFFSET VOLTAGE: ±200µV LOW OFFSET DRIFT: ±5µV/°C INTERNAL FIXED GAIN = 10V/V OR 50V/V SPECIFIED TEMPERATURE RANGE: –55°C to +125°C LOW INPUT BIAS CURRENT: 0.2pA WIDE BANDWIDTH: 550kHz in G = 10 HIGH SLEW RATE: 6.5V/µs LOW COST SO-8 AND TINY MSOP-8 PACKAGES
APPLICATIONS
q INDUSTRIAL SENSOR AMPLIFIERS Bridge, RTD, Thermocouple, Flow, Position q MEDICAL EQUIPMENT ECG, EEG, EMG Amplifiers q DRIVING A/D CONVERTERS q PCMCIA CARDS q AUDIO PROCESSING q COMMUNICATIONS q TEST EQUIPMENT q LOW COST AUTOMOTIVE INSTRUMENTATION
DESCRIPTION
The INA155 is a low-cost CMOS instrumentation amplifier with rail-to-rail output swing optimized for low voltage, single-supply operation. Wide bandwidth (550kHz in G = 10) and high slew rate (6.5V/µs) make the INA155 suitable for driving sampling A/D converters as well as general purpose and audio applications. Fast settling time allows use with higher speed sensors and transducers and rapid scanning data acquisition systems.
G = 10 pins open G = 50 pins connected
Gain can be set to 10V/V or 50V/V by pin strapping. Gains between these two values can be obtained with the addition of a single resistor. The INA155 is fully specified over the supply range of +2.7 to +5.5V. The INA155 is available in MSOP-...
Similar Datasheet