CMOS INSTRUMENTATION AMPLIFIER
®
INA 156
INA156
For most current data sheet and other product information, visit www.burr-brown.com
Single-Supply, R...
Description
®
INA 156
INA156
For most current data sheet and other product information, visit www.burr-brown.com
Single-Supply, Rail-to-Rail Output, CMOS INSTRUMENTATION AMPLIFIER
FEATURES
q q q q q q q q q RAIL-TO-RAIL OUTPUT SWING: Within 20mV LOW OFFSET DRIFT: ±5µV/°C INTERNAL FIXED GAIN = 10V/V OR 50V/V SPECIFIED TEMPERATURE RANGE: –55°C to +125°C LOW INPUT BIAS CURRENT: 1pA WIDE BANDWIDTH: 550kHz in G = 10 HIGH SLEW RATE: 6.5V/µs LOW COST TINY MSOP-8 PACKAGES
APPLICATIONS
q INDUSTRIAL SENSOR AMPLIFIERS: Bridge, RTD, Thermocouple, Flow, Position q MEDICAL EQUIPMENT: ECG, EEG, EMG Amplifiers q DRIVING A/D CONVERTERS q PCMCIA CARDS q AUDIO PROCESSING q COMMUNICATIONS q TEST EQUIPMENT q LOW COST AUTOMOTIVE INSTRUMENTATION
DESCRIPTION
The INA156 is a low-cost CMOS instrumentation amplifier with rail-to-rail output swing optimized for low-voltage, single-supply operation. Wide bandwidth (550kHz in G = 10) and high slew rate (6.5V/µs) make the INA156 suitable for driving sampling A/D converters as well as general purpose and audio applications. Fast settling time allows use with higher speed sensors and transducers, and rapid scanning data acquisition systems.
RG 1
Gain can be set to 10V/V or 50V/V by pin strapping. Gains between these two values can be obtained with the addition of a single resistor. The INA156 is fully specified over the supply range of +2.7V to +5.5V. The INA156 is available in an MSOP-8 surface-mount package specified for operation over the temperature range –55°...
Similar Datasheet