DIFFERENCE AMPLIFIER
®
INA 157
INA157
For most current data sheet and other product information, visit www.burr-brown.com
High-Speed, Prec...
Description
®
INA 157
INA157
For most current data sheet and other product information, visit www.burr-brown.com
High-Speed, Precision DIFFERENCE AMPLIFIER
FEATURES
q DESIGNED FOR LOW COST q LOW OFFSET VOLTAGE: ±500µV max q LOW OFFSET DRIFT: ±2µV/°C q LOW GAIN ERROR: ±0.05% max q WIDE BANDWIDTH: 3MHz q HIGH SLEW RATE: 14V/µs q FAST SETTLING TIME: 3µs to 0.01% q WIDE SUPPLY RANGE: ±4V to ±18V q LOW QUIESCENT CURRENT: 2.4mA q SO-8 SURFACE-MOUNT PACKAGE
APPLICATIONS
q DIFFERENTIAL INPUT AMPLIFIER q INSTRUMENTATION AMPLIFIER BUILDING BLOCK q G = 1/2 AMPLIFIER q G = 2 AMPLIFIER q DIFFERENTIAL CURRENT RECEIVER q VOLTAGE-CONTROLLED CURRENT SOURCE q GROUND LOOP ELIMINATOR q CURRENT SHUNT MONITOR
DESCRIPTION
V+
The INA157 is a high slew rate, G = 1/2 or G = 2 difference amplifier consisting of a precision op amp with a precision resistor network. The on-chip resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistors maintains gain accuracy and commonmode rejection over temperature. The input commonmode voltage range extends beyond the positive and negative supply rails. It operates on ±4V to ±18V supplies. The difference amplifier is the foundation of many commonly used circuits. The INA157 provides this circuit function without using an expensive precision resistor network. The INA157 is available in a SO-8 surface-mount package and is specified for operation over the extended industrial temperature range, –40°C to +85°C.
7 12kΩ 6...
Similar Datasheet