Quad Voltage Comparator
f
Semiconductor
S339
Quad Voltage Comparator
Description
The S339 consists of four independent voltage comparators de...
Description
f
Semiconductor
S339
Quad Voltage Comparator
Description
The S339 consists of four independent voltage comparators designed to operate from a single power supply over a wide voltage range.
Features
Single Supply Operation: 2V to 36V. Dual Supply Operation: ±1V to ±18V. Allow Comparison of Voltages Near Ground Potential. Low Current Drain 800uA Typ. Compatible with all Forms of Logic. Low Input Bias Current: 25nA Typ. Low Input Offset Current: ±5nA Typ. Low Offset Voltage: ±1mV Typ.
Applications
Transducer amplifier DC gain blocks Conventional operational amplifiers
Ordering Information
Type NO. S339 Marking S339 Package Code SOP-14
Outline Dimensions
Block Diagram
unit :
mm
A
KSI-K002-000
1
S339
Absolute maximum ratings
Characteristic
Supply voltage Differential input voltage Input voltage Power Dissipation Operating temperature Storage temperature
Symbol
VCC VIND VIN PD Topr Tstg
Ratings
36 or ±18 36 -0.3 ~ +36 300 -40 ~ +85 -65 ~ 150
Unit
V V V mW
°C °C
Electrical Characteristics
(Unless otherwise specified. VCC = 5V and –40 °C ≤ Ta ≤ +85 °C)
Characteristic
Input Offset Voltage Input Offset Current Input Bias Current Input Common Mode Voltage Range Supply Current Large Signal Voltage Gain Output Voltage (‘L’ Level) Response Time Output Sink Current Output Leakage Current
Symbol
VIOS IIOS IIB VICR ICC AV VSAT tRES ISINK ILeak
Test Condition
VO = 1.4V, Rs = 0Ω VCC = 5V, RL = ∞, All Channel VCC = 15V , RL = 15 KΩ
Min. Typ.
0 6 ±2
Max...
Similar Datasheet