S4560P

F Semiconductor S4560P Dual high slew rate OP AMP Description The S4560P is dual operational amplifiers which achieve approximately twice the high output current of the S4560P, as well as featuring a higher slew rate of 4V/us, a gain band width of 10MHz, and an improved frequency characteristic. Features Built-in output short-circuit protection circuit. Internal phase correction. No latch-up Wide same phase mode and differential voltage ranges High gain. low noise Applications Active filters Audio amplifiers VCOs Other electronic circuits Ordering Information Type NO. S4560P Marking S4560P Package Code DIP-8 Outline Dimensions unit : mm Block Diagram KSI-L011-000 1 S4560P Absolute maximum ratings Characteristic Supply voltage Differential input voltage Input voltage Power Dissipation Operating temperature Storage temperature PCB(50 ㎜×50 ㎜×1.6 ㎜). (Ta = 25 °C) Symbol VCC VID VIC PD Topr Tstg Ratings ±18 ±30 Unit V V V mW °C °C -Vcc~Vcc 800 -40 ~ +85 -55 ~ +125 * Refer to Pd characteristics diagram. The values for the S4560 are those when it is mounted on a glass epoxy Electrical Characteristics (Unless otherwise specified. VCC = +15V, VEE=－15V and Ta = 25 °C) Characteristic Input offset voltage Input offset current Input bias current Input common mode Voltage Range Maximum Output Voltage Symbol VIOS IIOS IIB VICR VOM Test Condition Rg ≤ 10 ㏀ RL≥ 10 ㏀ RL≥ 2 ㏀ Vout=±10V, Rg ≤ 10 ㏀ RL≥ 2 ㏀ Min. Typ. Max. ±12 ±12 ±10 86 70 0.5 5 50 ±14 ±14 ...