S6500P

F Semiconductor S6500P POWER FACTOR CORRECTION Description This device is power factor correction controller using a discontinues conduction mode of boost converter. Especially, it is optimized for electronic ballasts which prevent abnormal functions in load runaway and feedback loop fault conditions and low power and high density power supplies which require minimum board size. The external component R/C filter is not necessary because the R/C filter is included in current sense block. This is the improved version with a pin out equivalent to world standard. Features Dynamic, Static & Feedback OVP Extremely Low Start up Current (30uA Typ.) Very Low Operating Current (4mA Typ.) Internal Self Start Timer Current Sense with Internal RC Filter Trimmed ±1.5% internal Reference Under Voltage Lock Out with Hysteresis Pin Compatible to World Standard High Current Totem Pole Gate Drive Applications Electronic Ballast SMPS Ordering Information Type NO. S6500P Marking S6500P Package Code DIP-8 Outline Dimensions PIN Collection unit : mm KSI-L013-001 1 Internal Block Diagram 2. 5V Ref S6500P Under Voltage Lock Out Vcc + Error Amplifier INV 0.4 V 1 - Feedback OVP 40uA Ref uvlo + 18V 8 + Vref A + 2.3 V - Static OVP Vth(st) COMP 2 + Gain K 0. 5V Vref K= Vm2 10uA Dynamic OVP 40uA + 7 Self Starter S OUT MULT 3 Vm1 Vmo Vm1-(Vm2-Vref) 2V Q Drive Output uvlo 6 Vs GND Multiplier Vmo + 40k R + 2Vbe 5 Vz CS 4 5pF - IDET Current Se...