S6B0718

S6B0718 104 SEG / 81 COM DRIVER & CONTROLLER FOR STN LCD Feb. 2000. Ver. 2.1 Prepared by: Hyoung-Seok Lee lhs98@samsung.co.kr Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LCD Driver IC Team. 104 SEG / 81 COM DRIVER & CONTROLLER FOR STN LCD S6B0718 S6B0718 Specification Revision History Version 0.0 0.1 Original Modify syntax errors Append n-line inversion wave form to figure 11 on page 19. Modify figure 12 on page 20 Change the number of COM/SEG (85COM / 100SEG -> 81COM / 104SEG) Modify PAD location 1.1 Append PAD center coordinates to table 1, 2 on page 4, 5 Append referential instruction setup flow on page 48 to 51 Change bumped PAD size (modify figure 2 and table 1 on page 3) Change the PAD Center Coordinates of COM39 and COMS1. (modify table 2 on page 4) Change LCD power supply voltage (modify VOUT and V0 voltage on page1, 52, 53, 54, 55) Modify Set partial display duty ratio (refer to page 32) Modify N-line Inversion Register “2 to 32” -> “3 to 33” (refer to page 41) Change Consumption Current “2mA” -> “2uA”, “10mA” -> “ 10uA” (refer to page 47) Add Partial Duty Changing “Waiting for Discharging the LCD Power Levels (refer to figure 39) Fix the TBD Value of DC/AC Characteristics. Remove N-line Inversion function. Change the supply voltage(VDD) range (2.4 to 5.5 -> 2.4 to 3.6) Re...