SG3526

SG3526 Pulse Width Modulation Control Circuit The SG3526 is a high performance pulse width modulator integrated circuit intended for fixed frequency switching regulators and other power control applications. Functions included in this IC are a temperature compensated voltage reference, sawtooth oscillator, error amplifier, pulse width modulator, pulse metering and steering logic, and two high current totem pole outputs ideally suited for driving the capacitance of power FETs at high speeds. Additional protective features include soft start and undervoltage lockout, digital current limiting, double pulse inhibit, adjustable dead time and a data latch for single pulse metering. All digital control ports are TTL and B−series CMOS compatible. Active low logic design allows easy wired−OR connections for maximum flexibility. The versatility of this device enables implementation in single−ended or push−pull switching regulators that are transformerless or transformer coupled. The SG3526 is specified over a junction temperature range of 0° to +125°C. 8.0 V to 35 V Operation 5.0 V ±1% Trimmed Reference 1.0 Hz to 400 kHz Oscillator Range Dual Source/Sink Current Outputs: ±100 mA www.DataSheet4U.com Digital Current Limiting Programmable Dead Time Undervoltage Lockout Single Pulse Metering Programmable Soft−Start Wide Current Limit Common Mode Range Guaranteed 6 Unit Synchronization Vref VCC Ground Sync RDeadtime RT CT Reset CSoft−Start 18 17 Reference Regulator 15 ...