SY12

FRAME PLL MODULE – SY12 Nov 8, 2002 n FEATURES (PRELIMINARY) 5V or 3.3 VOLT LOW JITTER FREQUENCY TRANSLATOR CRYSTAL BASED MODULE n MECHANICAL SPECIFICATION PIN FUNCTIONS: [1] CLKIN -The pin that takes the input reference freq. [2] N/C (No connect) [3] N/C (No connect) [4] N/C (No connect) [5] N/C (No connect) [6] N/C (No connect) [7] GND (Ground) [8] N/C (No connect) [9] OUT-(LVCMOS levels) [10] OE (Output Enable/disable) [11] LD (Lock Detector)- indicates lock mode or free-run [12] RCLK (Recovered Clock) Output frequency divided to .040 (1.02) .250 MAX. (6.35 MAX.) .150 (3.81) SIDE VIEW .700 (17.78) .100 TYP. (2.54) 9 10 11 12 13 14 15 16 .055 (1.4) 1.000 (25.4) MARKING AREA .800 (20.32) .050 (1.27) 2 1 input frequency Ref. value 8 7 6 5 4 3 DENOTES PIN 1. [13] RCLKOE (Recovered Clock Output Enable/Disable) [14] N/C (No connect) [15] GND (Ground) [16] Vcc (Supply voltage) TOP VIEW BOTTOM VIEW ELECTRICAL SPECIFICATION PARAMETER Input frequency, nom (Preselected) Output frequency, nom (Preselected) Tracking/Capture range, min. Input/Output relationship, nom. Loop Filter Input waveform Output waveform, max./min. Supply voltage, nom. Supply current, max. Duty cycle Rise- / fall time, typ. Jitter generation, rms Operating temperature Storage temperature Absolute voltage range SYMBOL fin fout CONDITIONS **Over 0°C…+70°C, supply range, and 10 year aging Internal to module CMOS: Fin-1KHz~10MHz Vcc=+3.3VDC (5V Optional), Ta=+25°C, load=15pF Vcc±5% Vcc=+3.3VDC(5V Opt...