IRFY230
MECHANICAL DATA Dimensions in mm (inches)
10.41 (0.410) 10.67 (0.420) 4.83 (0.190) 5.08 (0.200) 0.89 (0.035) 1.14 (0.045)
16.38 (0.645) 16.89 (0.665)
13.38 (0.527) 13.64 (0.537)
3.56 (0.140) Dia. 3.81 (0.150) 10.41 (0.410) 10.92 (0.430)
N–CHANNEL POWER MOSFET FOR HI–REL APPLICATIONS
VDSS ID(cont) RDS(on) 200V 9A 0.40Ω
1 2 3
12.07 (0.500) 19.05 (0.750)
0.64 (0.025) Dia. 0.89 (0.035) 2.54 (0.100) BSC 3.05 (0.120) BSC
FEATURES
• HERMETICALLY SEALED TO–257AA METAL PACKAGE • SIMPLE DRIVE REQUIREMENTS
TO–257AA – Metal Package
Pad 1 – Gate Pad 2 – Drain Pad 3 – Source
• LIGHTWEIGHT • SCREENING OPTIONS AVAILABLE • ALL LEADS ISOLATED FROM CASE
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
VGS ID ID IDM PD TJ , Tstg RθJC Gate – Source Voltage Continuous Drain Current @ Tcase = 25°C Continuous Drain Current @ Tcase = 100°C Pulsed Drain Current Power Dissipation @ Tcase = 25°C Linear Derating Factor Operating and Storage Temperature Range Thermal Resistance Junction to Case ±20V 9A 6A 36A 75W 0.6W/°C –55 to 150°C 1.67°C/W max..
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail:
[email protected] Website: http://www.semelab.co.uk
Document Number 3279 Issue1
IRFY230
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise stated)
Parameter
BVDSS ∆TJ RDS(on) STATIC ELECTRICAL RATINGS Drain – Source Breakdown Voltage Breakdown Voltage Static Drain – Source On–State Resistance Forward Transconductance Zero Gate Voltage Drain Current Forward Gate – Source Leakage Reverse Gate – Source Leakage DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate – Source Charge Gate – Drain (“Miller”) Charge Turn–On Delay Time Rise Time Turn–Off Delay Time Fall Time
Test Conditions
VGS = 0 ID = 1mA VGS = 10V VGS = 10V VDS = VGS VDS ≥ 15V VGS = 0 VGS = 20V VGS = –20V VGS = 0 VDS = 25V f = 1MHz VGS = 10V VDS = 0.5BVDSS ID = 9A VDS = 0.5BVDSS VDD = 100V ID = 9A RG = 7.5Ω ID = 9A ID = 6A ID = 9A ID = 250µA IDS = 6A VDS = 0.8BVDSS TJ = 125°C ID = 1mA
Min.
200
Typ.
Max.
Unit
V
∆BVDSS Temperature Coefficient of
Reference to 25°C
0.29 0.40 0.49 2 3 25 250 100 -100 600 250 80 16 3 8 39 5.1 20 35 80 60 40 9 36 4
V / °C Ω V (Ω) S(Ω µA nA
VGS(th) Gate Threshold Voltage gfs IDSS IGSS IGSS Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf IS ISM VSD trr Qrr LD LS
pF
nC nC
ns
SOURCE – DRAIN DIODE CHARACTERISTICS Continuous Source Current Pulse Source Current Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge PACKAGE CHARACTERISTICS Internal Drain Inductance Internal Source Inductance IS = 9A VGS = 0 IS = 9A TJ = 25°C di / dt ≤ 100A/µs VDD ≤ 50V
(from 6mm down drain lead pad to centre of die)
A V ns µC
TJ = 25°C
1.4 500 6 8.7 8.7
nH
(from 6mm down source lead to centre of source bond pad)
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail:
[email protected] Website: http://www.semelab.co.uk
Document Number 3279 Issue1
.