DatasheetsPDF.com

DS1402D-017 Dataheets PDF



Part Number DS1402D-017
Manufacturers Dallas Semiconducotr
Logo Dallas Semiconducotr
Description iButton Probe Component Parts
Datasheet DS1402D-017 DatasheetDS1402D-017 Datasheet (PDF)

DS1402D-0XX iButton Probe Component Parts www.maxim-ic.com Features § § § Spring-Mounted iButton Reader Momentary Contact for Both F3 and F5 Style iButtons or Dwelled Contact for F5 Only Convenient Tactile Feedback System for Dwelled iButton Contact ® Mounting Pad Layout .82in Ground .080in Data .46in General Description The four component parts that are used to construct the Blue-Dotä iButton reader found in the DS1402D-DR8 and DS1402D-DB8 are described here. Diagrams 1 through 4 show t.

  DS1402D-017   DS1402D-017


Document
DS1402D-0XX iButton Probe Component Parts www.maxim-ic.com Features § § § Spring-Mounted iButton Reader Momentary Contact for Both F3 and F5 Style iButtons or Dwelled Contact for F5 Only Convenient Tactile Feedback System for Dwelled iButton Contact ® Mounting Pad Layout .82in Ground .080in Data .46in General Description The four component parts that are used to construct the Blue-Dotä iButton reader found in the DS1402D-DR8 and DS1402D-DB8 are described here. Diagrams 1 through 4 show the individual part dimensions. This document also describes how to assemble the Blue-Dot given the sub-parts listed in Table 1. The Blue-Dot can be assembled in the three easy steps described in the Assembly Instructions section. Table 1. DS1402D Parts Listing Reference A B C D Part DS1402D-011 DS1402D-010 DS1402D-003 DS1402D-017 DS1402D-041 Description Small Blue Insert Small Data Contact Spring Large Blue Support Large Ground Contact Subassembly of A-D Ordering Information DS1402D-11 DS1402D-10 DS1402D-3 DS1402D-17 DS1402D-41 iButton is a registered trademark of Dallas Semiconductor. Blue-Dot is a trademark of Dallas Semiconductor. 1 of 6 081304 DS1402D Diagram 1. DS1402D-003 Diagram 2. DS1402D-010 2 of 6 DS1402D Diagram 3. DS1402D-011 Diagram 4. DS1402D-017 3 of 6 DS1402D Assembly Instructions 1. Insert the end of the Data Spring (B) wire at the large coil end, into the slot at the top of the Data Button (A). Twist the spring clockwise into the slot until the end of the wire at the small coil end lines up with the edge of the slot in the Button. A B 2. Place the Data Button (A) with the Data Spring (B), assembled, into the Contact Support (C). D The Contact (D) loop fits around the side of the notch with the larger radii. 4 of 6 DS1402D 3. Compress the Data Spring (B) into the center of the Data Button (A) and slide the Contact (D) onto the Contact Support (C). Check that the Data Button (A) is free to move up and down through the Contact (D). Slot in Button (A) to line up with notch in Contact Support (C). C End of wire to line up with notch in Contact Support XY XY 5 of 6 DS1402D Overview Here is an assembly picture of the overview of steps listed above. See Assembly Instructions A Option: Can be twisted in at the last step of assembly. B C D Insert into Contact D Assembled Parts 6 of 6 .


DS1402D-011 DS1402D-017 DS1402D-041


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)