FULLY PROTECTED POWER MOSFET SWITCH
Data Sheet No.PD60145-K
IPS021L
FULLY PROTECTED POWER MOSFET SWITCH
Features
• • • • •
Over temperature shutdown Over c...
Description
Data Sheet No.PD60145-K
IPS021L
FULLY PROTECTED POWER MOSFET SWITCH
Features
Over temperature shutdown Over current shutdown Active clamp Low current & logic level input E.S.D protection
Product Summary Rds(on) V clamp Ishutdown Ton/Toff 150mΩ (max) 50V 5A 1.5µs
Description
The IPS021L is a fully protected three terminal SMART POWER MOSFET that features over-current, overtemperature, ESD protection and drain to source active clamp.This device combines a HEXFET® POWER MOSFET and a gate driver. It offers full protection and high reliability required in harsh environments. The driver allows short switching times and provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165oC or when the drain current reaches 5A. The device restarts once the input is cycled. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations.
Package
3 Lead SOT223
Typical Connection
Load
R in series (if needed)
Q
D IN control
S
S Logic signal
(Refer to lead assignment for correct pin configuration)
www.irf.com
1
IPS021L
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are referenced to SOURCE lead. (TAmbient = 25oC unless otherwise specified). PCB mounting uses the standard footprint with 70 µm copper thickness..
Symbol Parameter
Vds Vin Iin, max Isd cont. Maximum drain to source voltage Maxi...
Similar Datasheet