IPS511G

Data Sheet No.PD60156-K IPS511G/IPS512G FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH Features Over temperature protection (with auto-restart) Short-circuit protection (current limit) Active clamp E.S.D protection Status feedback Open load detection Logic ground isolated from power ground Product Summary Rds(on) V clamp I Limit V open load 150mΩ (max) 50V 5A 3V Description The IPS511G/IPS512G are fully protected five terminal high side switches with built in short-circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is controlled when it reaches Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the high side switch if the junction temperature exceeds Tshutdown. It will automatically restart after the junction has cooled 7oC below Tshutdown. A diagnostic pin is provided for status feedback of short-circuit, overtemperature and open load detection. The double level shifter circuitry allows large offsets between the logic ground and the load ground. Truth Table Op. Conditions Normal Normal Open load Open load Over current Over current Over-temperature Over-temperature In Out H H L L H H L H H L (limiting) L L H L (cycling) L L Dg H L H H L L L L Typical Connection + VCC + 5v 15K Status feedback Rdg Rin Output pull-up resistor Available Package Vcc Dg Logic control Out In Gnd 8 Lead SOIC (Single) IPS511G Logic signal Load Lo...