FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
Data Sheet No.PD 60155H
IPS511/IPS511S
FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
Features
• • • • • • •
Over temper...
Description
Data Sheet No.PD 60155H
IPS511/IPS511S
FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
Features
Over temperature protection (with auto-restart) Short-circuit protection (current limit ) Active clamp E.S.D protection Status feedback Open load detection Logic ground isolated from power ground
Product Summary Rds(on) V clamp I Limit V open load 135mΩ (max) 50V 5A 3V
Description
The IPS511/IPS511S are fully protected five terminal high side switches with built in short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is controlled when it reaches I lim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the high side switch if the junction temperature exceeds Tshutdown. It will automatically restart after the junction has cooled 7 oC below Tshutdown. A diagnostic pin is provided for status feedback of short-circuit, over-temperature and open load detection. The double level shifter circuitry allows large offsets between the logic ground and the load ground.
Truth Table
Op. Conditions Normal Normal Open load Open load Over current Over current Over-temperature Over-temperature In Out H H L L H H L H H L (limiting) L L H L (cycling) L L Dg H L H H L L L L
Typical Connection
+ VCC + 5v
15K Status feedback Rdg Rin Output pull-up resistor
Packages
Vcc Dg Logic control Out In Gnd
5 Lead D2Pak (SMD220 IPS511S
Logic signal
Load
Logic Gnd...
Similar Datasheet