ZM33164

SUPPLY VOLTAGE MONITOR ISSUE 2 – NOVEMBER 1995 DEVICE DESCRIPTION The ZM33164 is a three terminal under vo l ta ge mo ni t or ci rc ui t f or use i n microprocessor systems. The threshold voltage of the device has been set to 4.3volts making it ideal for 5 volt circuits. Included in the device is a precise voltage reference and a comparator with built in hysteresis to prevent erratic operation. The ZM33164 features an open collector output capable of sinking at least l0mA which only requires a single external resistor to interface to following circuits. Operation of the device is guaranteed from one volt upwards, from this level to the device threshold voltage the output is held low providing a power on reset function. Should the supply voltage, once established, at any time drop below the threshold level then the output again will pull low. The device is available in a TO92 package for through hole applications as well as SO8 and SOT223 for surface mount requirements. ZM33164 FEATURES SO8, SOT223 and TO92 packages Power on reset generator Automatic reset generation Low standby current Guaranteed operation from 1 volt Wide supply voltage range Internal clamp diode to discharge delay capacitor 4.3 volt threshold for 5 volt logic 60mV hysteresis prevents erratic operation APPLICATIONS Microprocessor systems Computers Computer peripherals Instrumentation Automotive Battery powered equipment SCHEMATIC DIAGRAM 4-94 ZM33164 ABSOLUTE MAXIMUM RATI...