SMPS PRIMARY I.C.
®
VIPer20/SP/DIP VIPer20A/ASP/ADIP
SMPS PRIMARY I.C.
T YPE VIPer20/SP/DIP VIPer20A/ASP/ADIP
V DSS 620V 700V
In 0.5 A...
Description
®
VIPer20/SP/DIP VIPer20A/ASP/ADIP
SMPS PRIMARY I.C.
T YPE VIPer20/SP/DIP VIPer20A/ASP/ADIP
V DSS 620V 700V
In 0.5 A 0.5 A
R DS(on) 16 Ω 18 Ω
PENTAWATT HV FEATURE s ADJUSTABLE SWITCHING FREQUENCY UP TO 200KHZ s CURRENT MODE CONTROL s SOFT START AND SHUT DOWN CONTROL s AUTOMATIC BURST MODE OPERATION IN STAND-BY CONDITION ABLE TO MEET ”BLUE ANGEL” NORM (<1W TOTAL POWER CONSUMPTION) s INTERNALLY TRIMMED ZENER REFERENCE s UNDERVOLTAGE LOCK-OUT WITH HYSTERESIS s INTEGRATED START-UP SUPPLY s AVALANCHE RUGGED s OVERTEMPERATURE PROTECTION s LOW STAND-BY CURRENT s ADJUSTABLE CURRENT LIMITATION DESCRIPTION VIPer20/20A, made BLOCK DIAGRAM
OSC
PENTAWATT HV (022Y)
10
1
PowerSO-10
DIP-8
using
VIPower
M0
Technology, combines on the same silicon chip a state-of-the-art PWM circuit together with an optimized high voltage avalanche rugged Vertical Power MOSFET (620V or 700V / 0.5A). Typical applications cover off line power supplies with a secondary power capability of 10W in wide range condition and 20W in single range or with doubler configuration. It is compatible from both primary or secondary regulation loop despite using around 50% less components when compared with a discrete solution. Burst mode operation is an additional feature of this device, offering the possibility to operate in stand-by mode without extra components.
DRAIN
ON/OFF OSCILLATOR
SECURITY LATCH VDD UVLO LOGIC R/S FF S Q
PWM LATCH R1 S FF R2 R3 Q
OVERTEMP. DETECTOR
0.5 V
+ _
1.7 µs delay
250 ns B...
Similar Datasheet