V29C51004B

MOSEL VITELIC V29C51004T/V29C51004B 4 MEGABIT (524,288 x 8 BIT) 5 VOLT CMOS FLASH MEMORY Description PRELIMINARY Features s s s s s s 512Kx8-bit Organization Address Access Time: 70, 90 ns Single 5V ± 10% Power Supply Sector Erase Mode Operation 16KB Boot Block (lockable) 1K bytes per Sector, 512 Sectors – Sector-Erase Cycle Time: 10ms (Max) – Byte-Write Cycle Time: 20µs (Max) Minimum 10,000 Erase-Program Cycles Low power dissipation – Active Read Current: 20mA (Typ) – Active Program Current: 30mA (Typ) – Standby Current: 50µA (Max) Hardware Data Protection Low VCC Program Inhibit Below 3.5V Self-timed write/erase operations with end-ofcycle detection – DATA Polling – Toggle Bit CMOS and TTL Interface Available in two versions – V29C51004T (Top Boot Block) – V29C51004B (Bottom Boot Block) Packages: – 32-pin TSOP-I – 32-pin PLCC s s s s s s s The V29C51004T/V29C51004B is a high speed 524,288 x 8 bit CMOS flash memory. Writing or erasing the device is done with a single 5 Volt power supply. The device has separate chip enable CE, write enable WE, and output enable OE controls to eliminate bus contention. The V29C51004T/V29C51004B offers a combination of: Boot Block with Sector Erase/Write Mode. The end of write/erase cycle is detected by DATA Polling of I/O7 or by the Toggle Bit I/O6. The V29C51004T/V29C51004B features a sector erase operation which allows each sector to be erased and reprogrammed without affecting data stored in other sectors. The device also supports f...