Document
DATA SHEET
µPD75064, 75066, 75068, 75064(A), 75066(A), 75068(A)
4-BIT SINGLE-CHIP MICROCOMPUTER
MOS INTEGRATED CIRCUIT
The µPD75068 is a member of the 75X series of 4-bit single-chip microcomputers. The minimum instruction execution time of the µPD75068's CPU is 0.95 µs. In addition to this high-speed capability, the chip contains an A /D converter and furnishes high-performance functions such as the serial bus interface (SBI) function compliant with the NEC standard format, providing powerful features and high cost performance. The µ PD75068(A) is a high-reliability version of the µPD75068. NEC also provides PROM versions suitable for small-scale production or evaluation samples in system development. The µPD75P068 is the PROM version for the µPD75064, 75066, 75068, and the µPD75P068(A) is that for the µPD75064(A), 75066(A), 75068(A). The detailed function descriptions are described in the document below. Please make sure to read this document before starting design.
µPD75068 User's Manual: IEU-1366
FEATURES • Variable instruction execution time advantageous to high-speed operation and power-saving:
• • • 0.95 µs, 1.91 µs, or 15.3 µs (at 4.19 MHz with the main system clock selected) 122 µ s (at 32.768 kHz with the subsystem clock selected) Capable of low-voltage operation: VDD = 2.7 to 6.0 V
• A /D converter (8-bit resolution, successive approximation): 8 channels • • • • •
Timer function: 3 channels On-chip NEC standard serial bus interface (SBI) Very low-power watch operation enabled (5 µA TYP. at 3 V) Pull-up resistor option allowed for 27 I/O lines The µPD75P068 and 75P068(A) (PROM versions) available: Capable of low-voltage operation (VDD = 2.7 to 6.0 V)
APPLICATIONS
• •
µPD75064, 75066, 75068
Home electronic appliances, air conditioners, cameras, and electronic measuring instruments
µPD75064(A), 75066(A), 75068(A)
Automotive electronics 5
The information in this document is subject to change without notice.
Document No. IC-3140B ( O.D. No. IC-8629B) Date Published December 1994 P Printed in Japan
The mark 5 shows revised points.
NEC CORPORATION 1993
µPD75064, 75066, 75068, 75064(A), 75066(A), 75068(A)
The µPD75064, 75066, 75068 and µPD75064(A), 75066(A), 75068(A) differ only in their quality grade. Unless otherwise specified, this data sheet describes the µPD75068 as the representative product. For products with the suffix (A) attached, please make the following substitutions when reading:
µPD75064 —> µ PD75064(A) µPD75066 —> µ PD75066(A) µPD75068 —> µ PD75068(A)
ORDERING INFORMATION
Part number Package 42-pin 44-pin 42-pin 44-pin 42-pin 44-pin 42-pin 44-pin 42-pin 44-pin 42-pin 44-pin plastic plastic plastic plastic plastic plastic plastic plastic plastic plastic plastic plastic shrink DIP (600 mil) QFP (10x10 mm) shrink DIP (600 mil) QFP (10x10 mm) shrink DIP (600 mil) QFP (10x10 mm) shrink DIP (600 mil) QFP (10x10 mm) shrink DIP (600 mil) QFP (10x10 mm) shrink DIP (600 mil) QFP (10x10 mm) Quality Grade Standard Standard Standard Standard Standard Standard Special Special Special Special Special Special
5 5 5 5 5 5
µPD75064CU-xxx µPD75064GB-xxx-3B4 µPD75066CU-xxx µPD75066GB-xxx-3B4 µPD75068CU-xxx µPD75068GB-xxx-3B4 µPD75064CU(A)-xxx µPD75064GB(A)-xxx-3B4 µPD75066CU(A)-xxx µPD75066GB(A)-xxx-3B4 µPD75068CU(A)-xxx µPD75068GB(A)-xxx-3B4
Remark xxx : ROM code suffix Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications. 5
DIFFERENCE BETWEEN µPD7506x SUBSERIES AND µPD7506x(A) SUBSERIES
Part number
µPD75064 µPD75066
µPD75064(A) µPD75066(A) µPD75068(A)
Special
Parameter Quality grade
µPD75068
Standard
2
µPD75064, 75066, 75068, 75064(A), 75066(A), 75068(A)
FUNCTION OVERVIEW
Item Instruction execution time Function
• Main system clock : 0.95 µs, 1.91 µs, 15.3 µs (at 4.19 MHz) • Subsystem clock : 122 µs (at 32.768 kHz) • µ PD75064 : 4096 × 8 bits • µ PD75066 : 6016 × 8 bits • µ PD75068 : 8064 × 8 bits
512 × 4 bits
Internal memory
ROM
RAM General register
• When operating in 4 bits: • When operating in 8 bits:
32 12 CMOS input
8 4 Of these, seven with software-specifiable on-chip pull-up resistors
I/O port
12
CMOS I/O
Software-specifiable on-chip pull-up resistors Four pins can directly drive LEDs.
8
N-ch open-drain I/O
Breakdown voltage: 10 V Mask-option-specifiable on-chip pull-up resistors Can directly drive LEDs.
Timer
3 chs.
• Timer/event counter • Basic interval timer : Applicable to watchdog timer • Watch timer : Capable of buzzer output
Serial interface
• 3-wire serial I/O mode • 2-wire serial I/O mode • SBI mode
16 bits Φ , fx /23, f x /24, f x/2 6 (Main system clock: at 4.19 MHz operation)
Bit sequencial buffer Clock output function A/D converter
• 8-bit resolution x 8 channels • Low-power operation possible : VDD = 2.7 to 6.0 V
External : 3 , Internal : 3 External : 1, Internal : 1
Vectored interrupt Tes.