DatasheetsPDF.com

UPD75P3036 Dataheets PDF



Part Number UPD75P3036
Manufacturers NEC
Logo NEC
Description 4-BIT SINGLE-CHIP MICROCONTROLLER
Datasheet UPD75P3036 DatasheetUPD75P3036 Datasheet (PDF)

DATA SHEET MOS INTEGRATED CIRCUIT µPD75P3036 4-BIT SINGLE-CHIP MICROCONTROLLER The µ PD75P3036 replaces the µ PD753036’s internal mask ROM with a one-time PROM or EPROM. Because the µPD75P3036 supports programming by users, it is suitable for use in prototype testing for system development using the µ PD753036 and for use in small-scale production. * Caution The µ PD75P3036KK-T is not designed to guarantee the reliability required for use in massproduction. Please use it only for performanc.

  UPD75P3036   UPD75P3036



Document
DATA SHEET MOS INTEGRATED CIRCUIT µPD75P3036 4-BIT SINGLE-CHIP MICROCONTROLLER The µ PD75P3036 replaces the µ PD753036’s internal mask ROM with a one-time PROM or EPROM. Because the µPD75P3036 supports programming by users, it is suitable for use in prototype testing for system development using the µ PD753036 and for use in small-scale production. * Caution The µ PD75P3036KK-T is not designed to guarantee the reliability required for use in massproduction. Please use it only for performance evaluation during testing and test production runs. Detailed descriptions of functions are provided in the following document. Be sure to read the document before designing. µ PD753036 User’s Manual : U10201E FEATURES • Compatible with µPD753036 • Internal PROM: 16384 × 8 bits • µPD75P3036KK-T : Reprogrammable (ideally suited for system evaluation) • µPD75P3036GC, 75P3036GK : One-time programmable (ideally suited for small-scale production) • Internal RAM: 768 × 4 bits • Can operate in the same power supply voltage as the mask version µPD753036 • VDD = 1.8 to 5.5 V • LCD controller/driver • A/D converter Caution Mask-option pull-up resistors are not provided in this device. ORDERING INFORMATION Part Number Package 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch) 80-pin plastic TQFP (fine pitch) (12 × 12 mm, 0.5-mm pitch) 80-pin ceramic WQFN Internal PROM One-time PROM One-time PROM EPROM Quality Grade Standard Standard Not applicable µ PD75P3036GC-3B9 µ PD75P3036GK-BE9 * µ PD75P3036KK-T Please refer to "Quality Grades on NEC Semiconductor Devices" (Document No. C11531E) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications. In this document, the term PROM is used in parts common to one-time PROM versions and EPROM versions. The information in this document is subject to change without notice. Document No. U11575EJ1V0DS00 (1st edition) (Previous No. IP-3657) Date Published November 1996 P Printed in Japan The mark * shows major revised points. © 1996 µ PD75P3036 Functional Outline Parameter Instruction execution time Function • 0.95, 1.91, 3.81, 15.3 µ s (main system clock: during 4.19-MHz operation) • 0.67, 1.33, 2.67, 10.7 µ s (main system clock: during 6.0-MHz operation) • 122 µ s (subsystem clock: during 32.768-kHz operation) PROM RAM General purpose register 16384 × 8 bits 768 × 4 bits • 4-bit operation: 8 × 4 banks • 8-bit operation: 4 × 4 banks 8 20 8 8 Also used for segment pins 13 V withstand voltage On-chip pull-up resistors can be specified by using software: 27 Internal memory Input/ output port CMOS input CMOS input/output Bit port output * N-ch open-drain input/output pins Total LCD controller/driver 44 • Segment selection: • Display mode selection: 12/16/20 segments (can be changed to bit port output in unit of 4; max. 8) Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 bias), 1/3 duty (1/3 bias), 1/4 duty (1/3 bias) Timer 5 channels • 8-bit timer/event counter:.


UPD75P3018A UPD75P3036 UPD75P308


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)