UR7HCPXZ-S440

PixiPointTM Z Serial UR7HCPXZ-S440 Advanced “Click-to-Select” No-DriftTM Pointing Stick Controller HID & SYSTEM MANAGEMENT PRODUCTS, MOUSECODERTM FAMILY DESCRIPTION The PixiPointTM Z Serial mouse encoder is a cost-effective, highfunctionality IC for strain gauge “miniature joysticks” with Z-axis functionality, such as the CTS series 106, 108 & 109. Ideal for portable and other systems that need to interface a mouse to a serial port, the low-power (typically less than 3mA) PixiPointTM Z offers an advanced algorithm for enhanced motion control. The IC implements the Tap (select) and Double Tap (execute) and Press Hold (drag) functions in firmware. No special drivers are needed to access these “Z” functions. Other special features provided by the IC include CleanStopTM, which allows the cursor to stop exactly when you want it to and EasyDragTM, which reduces the speed of the cursor during drag, making it easier to handle. The PixiPointTM Z utilizes a special, patented signal conditioning circuit which enables a low-cost, simple and real estate-saving implementation. Just a few low tolerance external components are needed. Serial transmission use speed of 1200 Baud with 7N1 framing. The IC, a CMOS device operating at 4 MHz, utilizes the standard serial mouse protocol, including Plug-nPlay identification for MouseWheel support. The PixiPointTM Z IC is also available for PS/2-enabled systems. FEATURES Interfaces the system via serial port, making it ideal for non-PC systems Acc...