US1206/1207/1208/1209
1A ULTRA LOW DROPOUT POSITIVE ADJUSTABLE & FIXED REGULATOR
PRELIMINARY DATASHEET
FEATURES
Low Dro...
US1206/1207/1208/1209
1A ULTRA LOW DROPOUT POSITIVE ADJUSTABLE & FIXED
REGULATOR
PRELIMINARY DATASHEET
FEATURES
Low Droput Voltage (500mV at 1A) 1% Voltage Reference Accuracy Low Ground Current 10uA Quiescent Current in Shutdown (US1207,1208) Fast Transient Response Current Limit and Thermal Shutdown Error Flag Signal for Output out of Regulation (US1207,1209) Pin Compatible with MIC39100/101/102 series
DESCRIPTION
The US1206 family of devices are ultra low dropout 1A
regulators using
PNP transistor as the pass element. These products are ideal when a single input supply is available only and the dropout voltage is less than 1V, exceeding the minimum dropout characteristics of
NPN/
PNP hybrid
regulators. One common application of these
regulators are where input is 3.3V and a 2.5V output is needed. Besides the low dropout of less than 0.5V, other features of the family of the parts are; micropower shutdown capability and output UVLO detection where Flag pin is switched low when output is below 5% of its nominal point. The US1206-XX in SOT223 is pin compatible with MIC39100-XX, US1207 and 1209 in SO8 power package are compatible with MIC39101 and 39102 respectively.
APPLICATIONS
2.5V Supply from 3.3V Input for the new generation of Logic ICs Computer Mother Board, Add on Cards High Efficiency Post
Regulator in SMPS
TYPICAL APPLICATION
Vout
3 2 1
C2
Vout
US1206-XX
Gnd Vin
1206app1-1.0
Vin
C1
PACKAGE ORDER INFORMATION
Tj (°C) 0 TO 125 0 TO 125 0 TO 125 0 TO 125 0 TO 1...