Photo Modules for PCM Remote Control Systems
TSOP12..CB1
Vishay Telefunken
Photo Modules for PCM Remote Control Systems
Available types for different carrier freque...
Description
TSOP12..CB1
Vishay Telefunken
Photo Modules for PCM Remote Control Systems
Available types for different carrier frequencies
Type TSOP1230CB1 TSOP1236CB1 TSOP1238CB1 TSOP1256CB1 fo 30 kHz 36 kHz 38 kHz 56 kHz Type TSOP1233CB1 TSOP1237CB1 TSOP1240CB1 fo 33 kHz 36.7 kHz 40 kHz
Description
The TSOP12..CB1 – series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses.
13 641
Features
D Internal filter for PCM frequency D Improved shielding against electrical field
disturbance
Special Features
D Enhanced immunity against all kinds of
disturbance light
D D D D
D No occurrence of disturbance pulses at the
output
TTL and CMOS compatibility Output active low Low power consumption Suitable burst length ≥10 cycles/burst
Block Diagram
2 Input Control Circuit 80 kW 3 PIN AGC Band Pass Demodulator 1 GND
94 8136
VS
OUT
Document Number 82124 Rev. 3, 30-Mar-01
www.vishay.com 1 (8)
TSOP12..CB1
Vishay Telefunken Absolute Maximum Ratings
Tamb = 25_C Parameter Supply Voltage Supply Current Output Voltage Output Current Junction Temperature Storage Temperature Range Operating Temperature Range Power Consumption Soldering Temperature Test Conditions (Pin 2) (Pin 2) (Pin 3) (Pin 3) S...
Similar Datasheet