TSOP1836SB1

TSOP18..SB1 Vishay Telefunken Photo Modules for PCM Remote Control Systems Available types for different carrier frequencies Type TSOP1830SB1 TSOP1836SB1 TSOP1838SB1 TSOP1856SB1 fo 30 kHz 36 kHz 38 kHz 56 kHz Type TSOP1833SB1 TSOP1837SB1 TSOP1840SB1 fo 33 kHz 36.7 kHz 40 kHz Description The TSOP18..SB1 – series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses. 16123 Features D D D D D Photo detector and preamplifier in one package Internal filter for PCM frequency TTL and CMOS compatibility Output active low Improved shielding against electrical field disturbance Special Features D Small size package D Enhanced immunity against all kinds of disturbance light D No occurrence of disturbance pulses at the D Short settling time after power on (<200ms) output D Suitable burst length ≥6 cycles/burst Block Diagram 3 Input Control Circuit 30 kW 1 PIN AGC Band Pass Demodulator 2 GND OUT VS 9612226 Document Number 82051 Rev. 5, 13-Jun-00 www.vishay.de FaxBack +1-408-970-5600 1 (7) TSOP18..SB1 Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C Parameter Supply Voltage Supply Current Output Voltage Output Current Junction Temperature Storage Temperature Range Opera...