Document
TSP058C - TSP320C
Breakover Voltage Max. VBO @ IBO V 77 88 98 130 160 180 220 260 300 350 400 (3,5,6)
On-State Voltage Max. V T @ 1A V 5 5 5 5 5 5 5 5 5 5 5 (3)
Part Number
Max. VDRM V
Max. I DRM µA 5 5 5 5 5 5 5 5 5 5 5 (3)
Max. I BO mA 800 800 800 800 800 800 800 800 800 800 800 (3)
Min. IH mA 150 150 150 150 150 150 150 150 150 150 150 (2,3)
Typ. pF 85 80 78 70 63 61 58 57 57 56 56 (3)
Max.
Typ. pF
Max.
C O @ 0 V dc 105 101 95 80 79 78 75 71 71 70 70 (3)
C O @ 5 0 V dc 35 34 30 23 20 19 19 19 18 18 17 (3) 43 40 37 34 29 28 27 26 26 25 24 (3)
TSP058C TSP065C TSP075C TSP090C TSP120C TSP140C TSP160C TSP190C TSP220C TSP275C TSP320C Notes
58 65 75 90 120 140 160 190 220 275 320 (1,3)
NOTES: 1. Specific VDRM values are available by request. 2. Specific IH values are available by request. 3. All ratings and characteristics are at 25 °C unless otherwise specified. 4. VDRM applies for the life of the device. IDRM will be in spec during and following operation of the device. 5. VBO1 is at 100V/msec, ISC =10Apk, VOC=1KVpk, 10/1000 Waveform 6. VBO2 is at f = 60 Hz, ISC = 1 A(RMS), Vac = 1KV(RMS), RL = 1 KΩ, 1/2 AC cycle
Ver: June 2001
PAGE 1
TSP058C - TSP320C
PRELIMINARY
AXIAL LEAD BI-DIRECTIONAL THYRISTOR SURGE PROTECTOR DEVICE
FEATURES
• Protects by limiting voltages and shunting surge currents away from sensitive circuits • Designed for telecommunications applications such as line cards, modems, PBX, FAX, LAN,VHDSL • Helps meet standards such as GR1089, ITU K.20, IEC950, UL1459&50, FCC part 68 • Low capacitance, High surge (A, B, C rating available), precise voltage limiting, Long life
DO-201AE
SUMMARY ELECTRICAL CHARACTERISTICS
Rated Repetitive PeakOff-State Voltage Repetitive Breakover Holding Off-State Capacitance PeakOff-State Current Currnet (f = 1 MHz , Vac = 15 mVRMS) Current
THYRISTOR
TSP058C - TSP320C
8. Independently evaluate and test the suitability and performance of the device in the application
MAXIMUM SURGE RATINGS (TJ = 25 ºC UNLESS OTHERWISE NOTED)
Rating Symbol Short-Circuit Current Wave Open-Circuit Voltage Wave Value Notes 2/10 µs 2/10 µs 500 A 8/20 µs 1.2/50 µs 350 A 10/160 µs 10/160 µs 200 A Non-Repetitive Peak Pulse Current I PPS 5/310 µs 10/700 µs 150 A 10/560 µs 10/560 µs 125 A 10/1000 µs 10/1000 µs 100 A (1,2,3,4) Non-Repetitive Peak On-State Surge Current I TSM
60A
(1,2,4,5,6)
Notes: 1. Thermal accumulation between successive surge tests is not allowed. 2. The device under test initially must be in thermal equilibrium with TJ = 25 °C. 3. Test at 1 cycle, 60 Hz. 4. Surge ratings are non-repetitive because instantaneous junction temperatures may exceed the maximum rated TJ. Nevertheless, devices will survive many surge applications without degradation. Surge capability will not degrade over a device's typical operating life. 5. Adjust the surge generator for optimum current-wave accuracy when both voltage and current wave specifications cannot be exactly met. The current wave is more important than.