Tuner IC. TUA6030 Datasheet

TUA6030 IC. Datasheet pdf. Equivalent

TUA6030 Datasheet
Recommendation TUA6030 Datasheet
Part TUA6030
Description 3-Band TV Tuner IC
Feature TUA6030; Wireless Components 3-Band TV Tuner IC TUA6030, TUA6032 Version 2.1 Specification July 2001 Revisi.
Manufacture Infineon Technologies AG
Datasheet
Download TUA6030 Datasheet





Infineon Technologies AG TUA6030
Wireless Components
3-Band TV Tuner IC
TUA6030, TUA6032 Version 2.1
Specification July 2001



Infineon Technologies AG TUA6030
Revision History: Current Version: Preliminary Data Sheet,V1.1, August 2000
Previous Version:Target Data Sheet, V1.0, November 1999
Page
(in previous
Version)
Page
(in current
Version)
Subjects (major changes since last revision)
all all
Version to V1.1, status to preliminary
Product Info Product Info Ordering code added.
4-2 4-2
Div. components changed.
4-3 4-3
Div. components changed.
5-2 5-2
Junction temperature and storage temperature +125 °C max.
5-5 5-5
Bus inputs SCL, SDA: VIH = 2.3 V.
5-8,5-9, 5-10 5-8,5-9, 5-10 Input conductance, input capacitance corrected.
5-10
5-10
Phase noise @ ±1 kHz frequency offset deleted.
Phase noise, LOW band oscillator: ΦOSC = 92 dBc/Hz min @ ±10 kHz.
Phase noise, MID band oscillator: ΦOSC = 92 dBc/Hz min @ ±10 kHz.
5-11
5-11
Phase noise @ ±1 kHz frequency offset deleted.
Phase noise, HIGH band oscillator: ΦOSC = 87 dBc/Hz min.
5-14
5-14
Table 5-5, Description of Symbols: CP and OS ’default’ added
5-15
5-15
Table 5-5, Test Modes: Normal operation ’default’ added.
5-14
5-14
Table 5-5, Description of Symbols: CP and OS ’default’ added.
5-15
5-15
Table 5-5, Test Modes: Normal operation ’default’ added.
5-16
5-16
Table 5-10, A to D converter levels, footnote ’No erratic codes in the transition’
added, Table 5-1, Defaults at power-on reset, Auxiliary byte, bit5 = 1.
5-18, 5-19,
5-20
5-18, 5-19,
5-20
Smith charts added..
div div
Tbf’s replaced .
Revision History: Current Version: Data Sheet, V2.0, March 2001
Previous Version:Preliminary Data Sheet, V1.1, August 2000
all all
Version to V2.0, preliminary deleted
3-3 3-3
LOW-/MID Oscillator: DC levels corrected
4-2, 4-3
4-2, 4-3
Application circuits modified
5-2 5-2
New definition of thermal properties.
5-6
5-6, 5-7
Saturation Voltages for P0, 2, 3 added
5-11
5-11
AGC take-over point: Min/max values added.
Mixer output impedance: Values added



Infineon Technologies AG TUA6030
Revision History: Current Version: Preliminary Data Sheet,V1.1, August 2000
5-11, 5-12
5-11, 5-12
Phase noise corrected
5-16
5-16
Table 5-1, Defaults at power-on reset, Auxiliary byte, bit5 = 1.
5-18
5-18
More telegram examples
Revision History: Current Version: Data Sheet, V2.1, July 2001
Previous Version:Preliminary Data Sheet, V2.0, March 2001
all all
Mirror imaged version TUA6032 added
ABM®, AOP®, ARCOFI®, ARCOFI®-BA, ARCOFI®-SP, DigiTape®, EPIC®-1, EPIC®-S, ELIC®, FALC®54, FALC®56, FALC®-E1, FALC®-LH, IDEC®, IOM®,
IOM®-1, IOM®-2, IPAT®-2, ISAC®-P, ISAC®-S, ISAC®-S TE, ISAC®-P TE, ITAC®, IWE®, MUSAC®-A, OCTAT®-P, QUAT®-S, SICAT®, SICOFI®, SICOFI®-
2, SICOFI®-4, SICOFI®-4µC, SLICOFI® are registered trademarks of Infineon Technologies AG.
ACE, ASM, ASP, POTSWIRE, QuadFALC, SCOUTare trademarks of Infineon Technologies AG.
Edition 03.99
Published by Infineon Technologies AG
Balanstraße 73,
81541 München
© Infineon Technologies AG 04.07.01.
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits im-
plemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest
Infineon Technologies Office.
Infineon Technologies AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing
material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components1 of the Infineon Technologies AG, may only be used in life-support devices or systems2 with the express written approval of the
Infineon Technologies AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-
support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they
fail, it is reasonable to assume that the health of the user may be endangered.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)