www.vishay.com
TZS4678 to TZS4717
Vishay Semiconductors
Small Signal Zener Diodes
DESIGN SUPPORT TOOLS click logo to get started
Models
Available
FEATURES • Zener voltage specified at 50 μA • Maximum delta VZ given from 10 μA to 100 μA • Very high stability • Low noise • AEC-Q101 qualified • Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS • Voltage stabilization
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
VZ range nom. Test current IZT VZ specification Circuit configuration
1.8 to 43 0.05
Pulse current Single
UNIT V mA
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
TZS4678 to TZS4717
TZS4678-GS08 to TZS4717-GS08
TAPED UNITS PER REEL MINIMUM ORDER QUANTITY
2500 (per 7" reel)
12 500/box
PACKAGE
PACKAGE NAME QuadroMELF (SOD-80)
WEIGHT 34 mg
MOLDING COMPOUND FLAMMABILITY RATING
UL 94 V-0
MOISTURE SENSITIVITY LEVEL
MSL level 1 (according J-STD-020)
SOLDERING CONDITIONS 260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
Power dissipation Zener current Junction to ambient air Junction temperature Storage temperature range
RthJA 300 K/W On PC board 50 mm x 50 mm x 1.6 mm
Ptot IZ RthJA Tj Tstg
Forward voltage (max.)
IF = 100 mA
VF
VALUE 500
Ptot/VZ 500 175
-65 to +175 1.5
UNIT mW mA K/W °C °C
V
Rev. 1.9, 22-Feb-18
1 Document Number: 85613
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
TZS4678 to TZS4717
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
ZENER VOLTAGE RANGE
TEST CURRENT
REVERSE CURRENT (3) VOLTAGE CHANGE (4)
PART NUMBER
VZ at IZT1 V
IZT1
IZT2 (2) mA
IR at VR μA V
VZ V
MIN.
NOM. (1)
MAX.
MAX.
MAX.
TZS4678
1.71 1.8 1.89 0.05 120 7.5
1
0.7
TZS4679
1.9
2
2.1 0.05 110
5
1
0.7
TZS4680
2.09 2.2 2.31 0.05 100
4
1
0.75
TZS4681
2.28
2.4
2.52 0.05
95
2
1
0.8
TZS4682
2.565
2.7
2.835
0.05
90
1
1
0.85
TZS4683
2.85 3
3.15 0.05
85
0.8
1
0.9
TZS4684
3.135
3.3
3.465
0.05
80
7.5
1.5
0.95
TZS4685
3.42
3.6
3.78 0.05
75
7.5
2
0.95
TZS4686
3.705
3.9
4.095
0.05
70
5
2
0.97
TZS4687
4.085
4.3
4.515
0.05
65
4
2
0.99
TZS4688
4.465
4.7
4.935
0.05
60
10
3
0.99
TZS4689
4.845
5.1
5.355
0.05
55
10
3
0.97
TZS4690
5.32
5.6
5.88 0.05
50
10
4
0.96
TZS4691
5.89
6.2
6.51 0.05
45
10
5
0.95
TZS4692
6.46
6.8
7.14 0.05
35
10
5.1
0.9
TZS4693
7.125 7.5 7.875 0.05 31.8
10
5.7
0.75
TZS4694
7.79
8.2
8.61 0.05
29
1
6.2
0.5
TZS4695
8.265 8.7 9.135 0.05 27.4
1
6.6
0.1
TZS4696
8.645 9.1 9.555 0.05 26.2
1
6.9
0.08
TZS4697
9.5 10 10.5 0.05 24.8 1 7.6
0.1
TZS4698
10.45
11
11.55 0.05 21.6
0.05
8.4
0.11
TZS4699
11.4
12
12.6 0.05 20.4 0.05
9.1
0.12
TZS4700
12.35
13
13.65
0.05
19
0.05
9.8
0.13
TZS4701
13.3 14 14.7 0.05 17.5 0.05 10.6
0.14
TZS4702
14.25 15 15.75 0.05 16.3 0.05 11.4
0.15
TZS4703
15.2 16 16.8 0.05 15.4 0.05 12.1
0.16
TZS4704
16.15 17 17.85 0.05 14.5 0.05 12.9
0.17
TZS4705
17.1 18 18.9 0.05 13.2 0.05 13.6
0.18
TZS4706
18.05 19 19.95 0.05 12.5 0.05 14.4
0.19
TZS4707
19 20 21 0.05 11.9 0.01 15.2
0.2
TZS4708
20.9 22 23.1 0.05 10.8 0.01 16.7
0.22
TZS4709
22.8
24
25.2 0.05 9.9
0.01 18.2
0.24
TZS4710
23.75
25
26.25
0.05
9.5
0.01
19
0.25
TZS4711
25.65
27
28.35
0.05
8.8
0.01 20.4
0.27
TZS4712
26.6
28
29.4 0.05 8.5
0.01 21.2
0.28
TZS4713
28.5
30
31.5 0.05 7.9
0.01 22.8
0.3
TZS4714
31.35
33
34.65
0.05
7.2
0.01
25
0.33
TZS4715
34.2
36
37.8 0.05 6.6
0.01 27.3
0.36
TZS4716
37.05
39
40.95
0.05
6.1
0.01 29.6
0.39
TZS4717
40.85
43
45.15
0.05
5.5
0.01 32.6
0.43
Notes
(1) Tolerancing and voltage designation (VZ). The type numbers shown have a standard tolerance of ± 5 % on the nominal zener voltage. (2) Maximum Zener current ratings (IZM). Maximum Zener current ratings are based on maximum Zener voltage of the individual units (3) Reverse leakage current (IR). Reverse leakage currents are guaranteed and measured at VR as shown on the table. (4) Maximum voltage change (VZ). Voltage change is equal to the difference between VZ at 100 μA and VZ at 10 μA.
Rev. 1.9, 22-Feb-18
2 Document Number: 85613
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TZS4678 to TZS4717
Vishay Semico.