Timer Control for Triac and Relay
U2100B
Timer Control for Triac and Relay
Description
The timer control circuit, U2100B, uses bipolar technology. It has ...
Description
U2100B
Timer Control for Triac and Relay
Description
The timer control circuit, U2100B, uses bipolar technology. It has different mode selections (Zero voltage switch, Phase control, Relay control). The output stage is triggered according to input conditions. It can be used in triac application for two or three wire system as a power switch.
Features
D Adjustable and retriggerable tracking time D Window monitoring for sensor input D Enable input for triggering D Internal noise suppression (40 ms) and retrigger
blocking (640 ms)
Applications
D Motion detectors D Touch sensors D Timer
D Two or three wire application
Package: DIP8, SO8
8 –VRef C2 0.5 VRef + – Trigger signal 6 Trigger window + – 5 0.6 VRef
Supply voltage limitation Voltage control monitoring Sync Mode selection
2 –VS 4
C1 L R1 Rsync Load Z D1
Noise suppression 40 ms Retrigger delay 640 ms
Control logic
3 Output
RG
Vmains
1 Enable Ct 7 RC Oscillator Rt
95 9876
GND 0.6 VRef 0.5 VRef ON OFF Divider 1:210
N
Figure 1. Block diagram with external circuit
TELEFUNKEN Semiconductors Rev. A1, 30-May-96
1 (9)
U2100B
Pin Description
GND –VS Output Sync 1 8 VRef Osc TRIG Pin 1 2 3 4 5 6 7 8 Symbol GND –VS Output Sync EN TRIG Osc VRef Function Reference point Supply voltage Driver output Synchronisation and mode selection Enable Input trigger signal RC Oscillator Reference voltage
2
7
3
6
4
95 9945
5
EN
General Description
Monostable integrated power control circuit, U2100B, can be used according to ...
Similar Datasheet