One-Shot Phase Control
U490B
One-Shot Phase Control
Description
The monolithic integrated bipolar circuit, U490B, is a one-shot power control c...
Description
U490B
One-Shot Phase Control
Description
The monolithic integrated bipolar circuit, U490B, is a one-shot power control circuit, designed to control the thyristor which is mainly used in electric stapler devices. The IC is preferred to realise a one-shot phase control, where any phase angle and thus any intensity of the load voltage is adjustable. After successful triggering and the following delay time, an ignition pulse at the output is released. A further triggering is only possible after the elapse of the delay time.
Features
D D D D D
L D1 1N4007 R1 Vmains 230 V 24 kW/ 2W R3 220 kW C3 1.5 nF
Applications
D Electric stapler devices
Phase controlled thyristor ignition Triggering with time delay Repetition time delay Supply current
x2 mA
Package: DIP8, SO8
Mains supply via resistor
S1
X
C1 47 mF/ 10 V 8 VS 3 4 GND
95 10866
Start delay Supply stage Sync. Repetition delay Trigger control
2 C2 47 nF
R2 220 kW
N
Load
D2
Phase control
POR Control input 5 R5
W
7 Output stage R7 33 W C7 22 nF
Ramp 6
R4 220 W C4 47 nF/ 250 V
X
C5 150 nF
[68 k
47 kW
C6 150 nF
Figure 1. Block diagram with external circuit
TELEFUNKEN Semiconductors Rev. A1, 29-May-96
1 (6)
U490B
Pin Description
NC 1 Trigger 2 8 VS 7 Output 6 Ramp 5 Contr Pin 1 2 3 4 5 6 7 8 Symbol NC Trigger Sync. GND Contr Ramp Output VS Function Not connected Triggering Synchronization Ground Control input Ramp Output Supply voltage
Sync. 3 GND 4
Supply, Pin 8
Internal voltage limiter enables a simple sup...
Similar Datasheet