DatasheetsPDF.com

TSI-5.0S2R0FM Dataheets PDF



Part Number TSI-5.0S2R0FM
Manufacturers Traco Electronic AG
Logo Traco Electronic AG
Description DC/DC Converter
Datasheet TSI-5.0S2R0FM DatasheetTSI-5.0S2R0FM Datasheet (PDF)

DC/DC Converter TSI-10 Series Features Step-down Switching Regulator with very high Efficiency (> 92%) 1.8 – 3.3 VDC or 5.0 VDC Output, up to 2.0 A Remote ON/OFF Overload Protection Low Output Noise Standby Current only 100 µA Small SIL-, DIP- or SMD-Package 2 Year Product Warranty 10 Watt This new generation of step-down converters provides designers with a cost-effective solution for converting a 5 VDC resp. 12 VDC voltage down to 1.8 – 3.3 VDC or to 5 VDC. To achieve highest efficiency, the.

  TSI-5.0S2R0FM   TSI-5.0S2R0FM


Document
DC/DC Converter TSI-10 Series Features Step-down Switching Regulator with very high Efficiency (> 92%) 1.8 – 3.3 VDC or 5.0 VDC Output, up to 2.0 A Remote ON/OFF Overload Protection Low Output Noise Standby Current only 100 µA Small SIL-, DIP- or SMD-Package 2 Year Product Warranty 10 Watt This new generation of step-down converters provides designers with a cost-effective solution for converting a 5 VDC resp. 12 VDC voltage down to 1.8 – 3.3 VDC or to 5 VDC. To achieve highest efficiency, these dc/dc converters are using newest technologies , as amorphous ferrite, solid aluminum capacitors and a synchronous commutation IC. The TSI-10 series needs no further external components to operate within its specifications. A very high efficiency allows operation without additional heatsink. This product finds many applications in distributed powersystems where voltage conversion at the point of load is an advantage. Models Ordercode TSI-3.3S2R0M TSI-3.3S2R0FM TSI-3.3S2R0SM TSI-5.0S2R0M TSI-5.0S2R0FM TSI-5.0S2R0SM Input voltage range Output voltage Output current max. Efficiency typ. Package SIP DIP SMD SIP DIP SMD 4.75 – 13.6 VDC * + 3.3 VDC 2000 mA 92.0 % 6.0 – 16.5 VDC ** + 5.0 VDC 2000 mA 93.0 % * Output adjustable 1.8 to 3.3 VDC ** Output adjustable 3.0 to 5.0 VDC www.tracopower.com Page 1 DC/DC Converter TSI-10 Series 10 Watt Input Specifications Input current (no load) all models Input current (at full load) TSI-3.3S2 models TSI-5.0S2 models Stand-by current 2 mA max. 1410 mA max. (5 Vin) 890 mA max. (12 Vin) 100 µA max. Output Specifications Voltage adjustment TSI-3.3S2 models TSI-5.0S2 models +1.8 VDC to +3.3 VDC +3.0 VDC to +5.0 VDC ± 0.5 % < 1.5 % 50 mVpk-pk max. 50% Load change: Vout over-/undershoot: 50% Load change: Vout over-/undershoot: ± 0.01 % / °C constant current >105% ON=Pin 1 (ON/OFF Pin) to pin 3 (GND) open OFF=Pin 1 (ON/OFF Pin) to pin 3 (GND) short 100 µsec typ. 70 mV typ. 100 µsec typ. 80 mV typ. Regulation – Input variation – Load variation 0 – 100 % Ripple and noise (20 MHz Bandwidth) Transient response time TSI-3.3S2 models TSI-5.0S2 models Temperature coefficient Short circuit protection Remote ON/OFF control General Specifications Temperature ranges – Operating – Storage Derating above 50°C – 25 °C ... +70 °C – 25 °C ... +85 °C 3 % / °C 95 % rel H max. >1’000’000 h @ 50 °C none 200 kHz typ. (PWM modulation) Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation Input/Output Switching frequency Physical Specifications Vibration Shock Package weight Soldering temperature 5 to 10 Hz amplitude 10 mm pk-pk 10 to 55 Hz acceleration 2 G acceleration 20 G max. time 11 ms 6g max. 235°C max. / 10 sec. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TSI-10 Series 10 Watt Outline Dimensions mm (inches) SIP package DIP package Pin-Out Pin 1 2 3 4 5 6 7 DIP Remote on/off +V Input (Vcc) –V Input (GND) +V Output V Output adj No function No function SIP Remote on/off +V Input (Vcc) –V Input (GND) +V Output V Output adj No pin No pin Specifications can be changed without notice www.tracopower.com Page 3 DC/DC Converter TSI-10 Series 10 Watt Outline Dimensions mm (inches) SMD package Pin-Out Pin 1 2 3 4 5 6 7 SMD Remote on/off +V Input (Vcc) –V Input (GND) +V Output V Output adj No function No function Solder Pad Specifications can be changed without notice www.tracopower.com Page 4 DC/DC Converter TSI-10 Series 10 Watt Connections Normal Connection (Standard) 2 +Vin +Vout 4 + TSI 10 Watt 100µF/25V - 1 ON/OFF GND V Adj. 5 2.2µF-4.7µF/25V 3 Remote ON/OFF Connection 2 +Vin +Vout 4 + TSI 10 Wa tt 1 5 100µF/25V - 3 2.2µF-4.7µF/25V Output Voltage Adjustement Connection 2 +Vin +Vout 4 + = - 100µF/25V ON/OFF GND 1 3 V Adj. 5 100µF-200µF/25V VR1 = Rx · 1200 · (Vo - 1.195) Rx · 1.195 - 1200 · (Vo - 1.195) TSI-3.3SxROx ==> Rx = 2130 Ohm Output Voltage = 1.8 - 3.3VDC TSI-5.0SxROFx ==> Rx = 3840 Ohm Output Voltage = 3.0 - 5.0VDC Vo = adjusted ooutput voltage Specifications can be changed without notice Rev. 10/00 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] Load C1 TSI 10 Wa tt VR1 C2 Load = C1 ON/OFF GND V Adj. C2 Load = C1 C2 • internet: http://www.tracopower.com Page 5 .


TSI-33S3R0 TSI-5.0S2R0FM TSI-5.0S2R0M


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)