Photo Modules for PCM Remote Control Systems
TSOP11..XG1
Vishay Telefunken
Photo Modules for PCM Remote Control Systems
Available types for different carrier freque...
Description
TSOP11..XG1
Vishay Telefunken
Photo Modules for PCM Remote Control Systems
Available types for different carrier frequencies
Type TSOP1130XG1 TSOP1136XG1 TSOP1138XG1 TSOP1156XG1 fo 30 kHz 36 kHz 38 kHz 56 kHz Type TSOP1133XG1 TSOP1137XG1 TSOP1140XG1 fo 33 kHz 36.7 kHz 40 kHz
Description
The TSOP11..XG1 – series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the operation with short burst transmission codes (e.g. RECS 80) and high data rates.
GND VS OUT
96 12595
Features
D Photo detector and preamplifier in one package D Internal filter for PCM frequency D Improved shielding against electrical field D D D D
disturbance TTL and CMOS compatibility Output active low Low power consumption High immunity against ambient light
Special Features
D Enhanced data rate of 2400 bit/s D Operation with short bursts possible
(≥6 cycles/burst)
Block Diagram
2 Input Control Circuit 80 kW 3 PIN AGC Band Pass Demodulator 1 GND
94 8136
VS
OUT
Document Number 82146 Rev. 3, 29-Mar-01
www.vishay.com 1 (9)
TSOP11..XG1
Vishay Telefunken Absolute Maximum Ratings
Tamb = 25_C Parameter Supply Voltage Supply Current Output Voltage Output Current Junction Temperature Storage Temperature Range Operating Temperature Range Power Consumption Soldering Temperature Test Conditions (Pin 2) (Pin 2...
Similar Datasheet