DatasheetsPDF.com

TQ2H-L-2M-4.5V Dataheets PDF



Part Number TQ2H-L-2M-4.5V
Manufacturers ETC
Logo ETC
Description LOW PROFILE 2 FORM C RELAY
Datasheet TQ2H-L-2M-4.5V DatasheetTQ2H-L-2M-4.5V Datasheet (PDF)

TESTING LOW PROFILE 2 FORM C RELAY TQ-RELAYS FEATURES 9 .354 26.7 1.051 5+0.4 –0.2 .197+.016 –.008 9 .354 5+0.4 –0.2 .197+.016 –.008 14 .551 • High sensitivity: 2 Form C: 140 mW power consumption (single side stable type) 4 Form C: 280 mW power consumption (single side stable type) • Surge voltage withstand: 1500 V FCC Part 68 • Sealed construction allows automatic washing • Self-clinching terminal also available • M.B.B. contact types available mm inch SPECIFICATIONS Contact Standard (B.B.

  TQ2H-L-2M-4.5V   TQ2H-L-2M-4.5V


Document
TESTING LOW PROFILE 2 FORM C RELAY TQ-RELAYS FEATURES 9 .354 26.7 1.051 5+0.4 –0.2 .197+.016 –.008 9 .354 5+0.4 –0.2 .197+.016 –.008 14 .551 • High sensitivity: 2 Form C: 140 mW power consumption (single side stable type) 4 Form C: 280 mW power consumption (single side stable type) • Surge voltage withstand: 1500 V FCC Part 68 • Sealed construction allows automatic washing • Self-clinching terminal also available • M.B.B. contact types available mm inch SPECIFICATIONS Contact Standard (B.B.M) type 2 Form C 4 Form C 50 mΩ Gold-clad silver 1 A 30 V DC 1 A 30 V 0.5 A 125 V AC DC 30 W, 62.5 V A 30 W Initial breakdown voltage M.B.B.type 2 Form D Initial insulation resistance*1 Between open contacts Between contact and coil Between contact sets FCC surge voltage between open contacts Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) M.B.B. time*8 Temperature rise*2 (at 20°C) Functional*5 Shock resistance Destructive*6 Vibration resistance Functional*7 Destructive Characteristics Standard M.B.B.type (B.B.M) type Min. 1,000 MΩ (at 500 V DC) 750 Vrms for 1 min. 300 Vrms for 1 min. (Detection current: (Detection current: 10 mA) 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 V Max. 3 ms (Approx. 2 ms) [Max. 3 ms (Approx. 2 ms)] Max. 3 ms (Approx. 1 ms) [Max. 3 ms (Approx. 2 ms)] — Min. 10 µs. Max. 50°C Min. 490 m/s2 {50G} Min. 980 m/s2 {100G} 176.4 m/s2 {18G}, 10 to 55 Hz at double amplitude of 3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +50°C –40°C to +70°C –40°F to +158°F –40°F to +122°F 5 to 85% R.H. Approx. 1.5 g .053 oz Approx. 3 g .106 oz. — Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity f1 Single side stable Nominal operating 1 coil latching power 2 coil latching Mechanical (at 180 cpm) Expected 1 A 30 V DC life (min. Electrical (at 20 cpm) resistive opera(1 A 30 V DC 0.5 A 125 V AC tions) resistive) resistive Note: 110 V DC, 125 V AC 110 V DC 1A 10 µA 10 mV DC 140 mW (3 to 12 V DC) 280 mW 200 mW (3 to 24 V DC) 200 mW 400 mW (24 V DC) (48 V DC) 300 mW (48 V DC) 100 mW (3 to 12 V DC) 200 mW — 150 mW (24 V DC) 200 mW (3 to 12 V DC) 400 mW — 300 mW (24 V DC) 108 107 2×105 105 105 — Conditions for Ambient operation, transtemperature port and storage*9 (Not freezing and condensing at low Humidity temperature) 2 Form C: Unit weight 4 Form C: f1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 µs. *8 M.B.B. time: Measuring condition Min. 10 µs 500 Ω 5 V DC *9 Refer to 4. Conditions for operation, transport and storage mentioned in Cautions for use (Page 178). 133 TQ ORDERING INFORMATION EX. TQ Contact arrangement 2: 2 Form C 4: 4 Form C 2 H L2 Operating function 2M 3V MBB function Coil voltage (DC) 3, 4.5, 5, 6, 9, 12, 24, 48* V Terninal shape Nil: Standard PC board Nil: Single side stable Nil: Standard L: 1 coil latching terminal (B.B.M.) type H: Self-clinching terminal L2: 2 coil latching 2M: 2M.B.B. type *48 V coil type: Single side stable only Notes: 1. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TQ2-12V-3. 2. M.B.B. contact types are available only for TQ2 type. TYPES AND COIL DATA (at 20°C 68°F) 1. Standard (B.B.M.) type 2 Form C type 1. Single side stable Part No. Standard PC board terminal TQ2-3 V TQ2-4.5 V TQ2-5 V TQ2-6 V TQ2-9 V TQ2-12 V TQ2-24 V TQ2-48 V Self-clinching terminal TQ2H-3 V TQ2H-4.5 V TQ2H-5 V TQ2H-6 V TQ2H-9 V TQ2H-12 V TQ2H-24 V TQ2H-48 V Nominal voltage, V DC 3 4.5 5 6 9 12 24 48 Pick-up voltage, V DC (max.) 2.25 3.38 3.75 4.5 6.75 9 18 36 Drop-out voltage, V DC (min.) 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8 Nominal operating current, mA (±10%) 46.7 31.1 28.1 23.3 15.5 11.7 8.3 6.25 Coil resistance, Ω (±10%) 64.3 144.6 178 257 579 1,028 2,880 7,680 Nominal operating power, mW 140 140 140 140 140 140 200 300 Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36 57.6 2. 1 Coil latching Part No. Standard PC board terminal TQ2-L-3 V TQ2-L-4.5 V TQ2-L-5 V TQ2-L-6 V TQ2-L-9 V TQ2-L-12 V TQ2-L-24 V Self-clinching terminal TQ2H-L-3 V TQ2H-L-4.5 V .


TQ2H-L-2M-3V TQ2H-L-2M-4.5V TQ2H-L-2M-48V


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)