3V Cellular TDMA/AMPS LNA/mixer Receiver IC
WIRELESS COMMUNICATIONS DIVISION
VDD
CNTRL VDD
TQ9223C
DATA SHEET
Mixer IF out Mixer RF In LNA out
Mixer LO In Gain ...
Description
WIRELESS COMMUNICATIONS DIVISION
VDD
CNTRL VDD
TQ9223C
DATA SHEET
Mixer IF out Mixer RF In LNA out
Mixer LO In Gain Select RF In
3V Cellular TDMA/AMPS LNA/mixer Receiver IC
Features
§+3-V single supply §On-chip LO buffer §Mixer LO and RF matched to 50Ω §Low-cost SO-14 plastic package §Gain Select (high/low)
GND
LO Tune
Product Description
The TQ9223C 3V RFIC Downconverter is a RF receiver IC front end designed for the high dynamic range cellular communications standards. The TQ9223C provides a 2.8dB system noise figure for excellent sensitivity, and a good signal range with -11dB input IP3. Its low current consumption, single +3V operation and small plastic surface-mount package are ideally suited for cost-competitive, space-limited and portable applications. The TQ9223C will operate over a RF frequency range of 800 to 1000MHz, and therefore may be used for any of the cellular and cordless telephony standards. Electrical Specifications1
Parameter Frequency Gain Noise Figure Input 3rd Order Intercept DC supply Current Min 800 19.0 2.6 -11.0 15.0 Typ Max 1000 Units MHz dB dB dBm mA
Applications
§Digital Mobile Phones §AMPS Mobile Phones §ISM 900MHz §Cordless Telephones §CDPD terminals
Note 1: Test Conditions: Vdd=3.75V, Ta=25C, filter IL=3.0dB, RF=881MHz, LO=966MHz, IF=85MHz, LO input=-6dBm
For additional information and latest specifications, see our website: www.triquint.com
1
TQ9223C Data Sheet
Electrical Characteristics
Parameter RF Frequency LO Frequency IF F...
Similar Datasheet