DUAL WIDE BAND OPERATIONAL AMPLIFIER WITH HIGH OUTPUT CURRENT
TS616
DUAL WIDE BAND OPERATIONAL AMPLIFIER WITH HIGH OUTPUT CURRENT
s LOW NOISE : 2.5nV/√Hz s HIGH OUTPUT CURRENT : 420m...
Description
TS616
DUAL WIDE BAND OPERATIONAL AMPLIFIER WITH HIGH OUTPUT CURRENT
s LOW NOISE : 2.5nV/√Hz s HIGH OUTPUT CURRENT : 420mA s VERY LOW HARMONIC AND INTERMODULATION DISTORTION
s HIGH SLEW RATE : 420V/µs s -3dB BANDWIDTH : 40MHz@gain=12dB on
25Ω load single ended.
s 20.7Vp-p DIFFERENTIAL OUTPUT SWING
on 50Ω load, 12V power supply
DW SO8 Exposed-Pad (Plastic Micro package)
s CURRENT FEEDBACK STRUCTURE s 5V to 12V POWER SUPPLY s SPECIFIED FOR 20Ω and 50Ω
DIFFERENTIAL LOAD DESCRIPTION The TS616 is a dual operational amplifier featuring a high output current of 410mA. The drivers can be configured differentially for driving signals in telecommunication systems using multiple carriers. The TS616 is ideally suited for xDSL (High Speed Asymmetrical Digital Subscriber Line) applications. This circuit is capable of driving a 10 Ω or 25 Ω load at ±2.5V, 5V, ±6V or +12V power supply. The TS616 is able to reach a -3dB bandwidth of 40MHz on 25Ω load with a 12dB gain. This device is designed for high slew rates supporting low harmonic distortion and intermodulation. ORDER CODE
Part Number TS616IDW TS616IDWT Temperature Range -40, +85°C -40, +85°C Package DW DW
DW = Small Outline Package with Exposed-Pad, T = Tape & Real
PIN CONNECTIONS (top view)
Output1 1 Inverting Input1 2 Non Inverting Input1 3 VCC - 4
8 VCC +
+
7 Output2
+
6 Inverting Input2 5 Non Inverting Input2
APPLICATION
Cross Section View Showing Exposed-Pad This pad can be connected to a (-Vcc) copper area on the PCB
...
Similar Datasheet