Motor-Driving Applications. TND017SW Datasheet


TND017SW Applications. Datasheet pdf. Equivalent


TND017SW


Lowside Power Switch Lamp/ Solenoid/ and Motor-Driving Applications
Ordering number:ENN6481A

ExPD (Excellent Power Device)

TND017MP, TND017SW
Lowside Power Switch Lamp, Solenoid, and Motor-Driving Applications
Features
· N-channel MOSFET built in. · Overheat protection. · Overcurrent protection. (Self recovery type current limiting function) · Overvoltage protection. · TND017SW incorporates two sets of circuit.

Package Dimensions
Unit:mm 2145
[TND017MP]
6.0 5.0

Package Dimensions
Unit:mm 2181
[TND017SW]
8 5
0.3 4.4

4.7

0.5 0.6

3.0

8.5

5.0
14.0

1.8max

1
6.0

4

0.2

0.5

0.5

1 2 3

0.595

1.27

0.43

1.45

1.45

1 : GND 2 : OUT 3 : IN SANYO : MP

1 : GND1 2 : IN1 3 : GND2 4 : IN2 5 : OUT2 6 : OUT2 7 : OUT1 8 : OUT1 SANYO : SOP8

Absolute Maximum Ratings at Ta = 25˚C
Parameter Drain-to-Source Voltage Output Current Input Voltage Symbol VDS IO(DC) VIN TND017MP Allowable Power Dissipation PD TND017SW Mounted on a ceramic board (1200mm2×0.8mm) 1unit TND017SW Mounted on a ceramic board (1200mm2×0.8mm) Operating Supply Voltage Operating Temperature Junction Temperature Storage Temperature VDS(opr) Topr Tj Tstg Conditions Ratings 60 1.5 –0.3 to +10 1.0 1.7 2.0 40 –40 to +85 Internally Limited –55 to +150 Unit V A V W W W V ˚C ˚C ˚C

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s contro...



TND017SW
Ordering number:ENN6481A
ExPD (Excellent Power Device)
TND017MP, TND017SW
Lowside Power Switch
Lamp, Solenoid, and Motor-Driving Applications
Features
· N-channel MOSFET built in.
· Overheat protection.
· Overcurrent protection.
(Self recovery type current
limiting function)
· Overvoltage protection.
· TND017SW incorporates two
sets of circuit.
Package Dimensions
Unit:mm
2145
[TND017MP]
6.0
5.0 4.7
0.5
0.6
0.5
123
1.45 1.45
0.5
1 : GND
2 : OUT
3 : IN
SANYO : MP
Package Dimensions
Unit:mm
2181
[TND017SW]
85
1
5.0
4
0.595 1.27 0.43
0.2
1 : GND1
2 : IN1
3 : GND2
4 : IN2
5 : OUT2
6 : OUT2
7 : OUT1
8 : OUT1
SANYO : SOP8
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Drain-to-Source Voltage
Output Current
Input Voltage
Allowable Power Dissipation
Operating Supply Voltage
Operating Temperature
Junction Temperature
Storage Temperature
Symbol
VDS
IO(DC)
VIN
PD
VDS(opr)
Topr
Tj
Tstg
Conditions
TND017MP
TND017SW
Mounted on a ceramic board (1200mm2×0.8mm) 1unit
TND017SW
Mounted on a ceramic board (1200mm2×0.8mm)
Ratings
60
1.5
–0.3 to +10
1.0
Unit
V
A
V
W
1.7 W
2.0
40
–40 to +85
Internally Limited
–55 to +150
W
V
˚C
˚C
˚C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
12501TS TA-3183/42000TS (KOTO) TA-2832 No.6481–1/5

TND017SW
TND017MP, 017SW
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
min typ max
Unit
Drain-to-Source Clamp Voltage
Output-OFF Current
Input Threshold Voltage
Protection Circuit Operating Input Voltage
Drain-to-Source ON Resistance
Input Current (Output ON)
Overheat Detecting Temperature
Overcurrent Detecting Current
Overcurrent Limit (Peak)
Input Clamp Voltage
VDS clamp
IDSS(1)
IDSS(2)
VIN(th)
VIN(opr)
RDS(on)
IIN
Tj(sd)
Is
ILMT
VIN,clamp
VIN=0, IO=1mA
VIN=0, VDS=50V
VIN=0, VDS=12V
VDS=5V, IO=1mA
VIN=5V, IO=1A
VIN=5V
VIN=5V, IO=1A
VIN=5V
VIN=5V
IIN=1mA
60
1.0 1.5
4
0.3
0.25
120 150
3.0 4.0
3.5 4.5
10
V
10 µA
5 µA
2.0 V
10 V
0.4
0.6 mA
190 ˚C
5.0 A
5.5 A
V
Notes : 1. Overcurrent protection circuit limits the output current to the range of overcurrent limit value.
2. During overheat protecting operation, output current is once turned off and then recovers after the input voltage falls to the reset voltage
(1.0V) or below.
Block Diagram
OUT(D)
Overcurrent
protection
Overvoltage
protection
IN
Output current
control
Gate
shutdown
ESD
protection
Overheat
protection
RDS(on) -- Ta
0.5
IO=1A
0.4 5V
V IN=4V
0.3 6V
0.2
0.1
0
--50
0.6
0.5
--25 0
25 50 75 100
Ambient Temperature, Ta – ˚C
IT02011
IIN -- Ta
VIN=5V
0.4
0.3
0.2
0.1
0
--50
--25 0
25 50 75 100
Ambient Temperature, Ta – ˚C
IT02013
GND(S)
0.6
0.5
RDS(on) -- VIN
IO=1A
0.4 Ta=85°C
0.3 25°C
--40°C
0.2
0.1
0
2 3 4 5 6 7 8 9 10
Input Voltage, VIN – V
IT02012
IIN -- VIN
1.0
Ta=25°C
0.9
0.8
0.7
0.6
0.5
Protection operation
0.4
0.3 Normal operation
0.2
0.1
0
0 1 2 3 4 5 6 7 8 9 10
Input Voltage, VIN – V
IT02014
No.6481–2/5




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)