DatasheetsPDF.com

TN2-L-H-48V Dataheets PDF



Part Number TN2-L-H-48V
Manufacturers Matsushita Electric Works(Nais)
Logo Matsushita Electric Works(Nais)
Description SLIM POLARIZED RELAY
Datasheet TN2-L-H-48V DatasheetTN2-L-H-48V Datasheet (PDF)

SLIM POLARIZED RELAY TN-RELAYS • Surge voltage withstand: 1500 V FCC Part 68 • Sealed construction allows automatic cleaning • Self-clinching terminal also available 14 .551 5.6 .220 9.8 .386 FEATURES • Small size for minimal PC board mounting requirements • Small header area makes higher density mounting possible • High sensitivity: 140 mW nominal operating power (single side stable 3-12 V type) mm inch SPECIFICATIONS Contact Arrangement Initial contact resistance, max. (By voltage drop 6.

  TN2-L-H-48V   TN2-L-H-48V


Document
SLIM POLARIZED RELAY TN-RELAYS • Surge voltage withstand: 1500 V FCC Part 68 • Sealed construction allows automatic cleaning • Self-clinching terminal also available 14 .551 5.6 .220 9.8 .386 FEATURES • Small size for minimal PC board mounting requirements • Small header area makes higher density mounting possible • High sensitivity: 140 mW nominal operating power (single side stable 3-12 V type) mm inch SPECIFICATIONS Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity f1 Single side stable Nominal operating power 1 coil latching 2 coil latching Mechanical (at 180 cpm) 1 A 30 V DC resistive load Electrical (at 20 cpm) 0.5 A 125 V AC resistive load 2 Form C 60 mΩ Gold-clad silver 1 A 30 V DC, 0.5 A 125 V AC 30 W, 62.5 VA 110 V DC,125 V AC 1A 10 µA 10 mV DC 140 mW (3 to 12 V DC) 200 mW (24 V DC) 300 mW (48 V DC) 100 mW (3 to 12 V DC) 150 mW (24 V DC) 200 mW (3 to 12 V DC) 300 mW (24 V DC) 108 2 × 105 105 Characteristics Initial insulation resistance*1 Between open contacts Initial Between contact and breakdown coil voltage Between contact sets FCC surge voltage between open contacts Temperature rise*2 (at 20°C) Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight Ambient temperature Humidity Max. 3 [Max. 3 Max. 3 [Max. 3 Min. 1,000 MΩ (at 500 V DC) 750 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 V Max. 50°C ms (Approx. 2 ms (Approx. 2 ms (Approx. 1 ms (Approx. 2 ms) ms)] ms) ms)] Expected life (min. operations) Note: Min. 490 m/s2 {50G} Min. 980 m/s2 {100G} 176.4 m/s2 {18G}, 10 to 55 Hz at double amplitude of 3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +70°C –40°F to +158°F 5 to 85% R.H. Approx. 1.5 g .053 oz f1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. 4 * Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 µs. *8 Refer to 4. Conditions for operation, transport and storage mentioned in Cautions for use (Page 178). ORDERING INFORMATION Ex. TN 2 L2 H 12V Contact arrangement 2: 2 Form C Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching Terminal shape Nil: Standard PC board terminal H: Self-clinching terminal Coil voltage(DC) 3,4.5,5,6,9,12, 24,48*V *48 V coil type: Single side stable only Note: AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix “–3” like TN2–12V–3. 150 TN TYPES AND COIL DATA (at 20°C 68°F) 1. Single side stable Part No. Standard PC board terminal TN2-3 V TN2-4.5 V TN2-5 V TN2-6 V TN2-9 V TN2-12 V TN2-24 V TN2-48 V Self-clinching terminal TN2-H-3 V TN2-H-4.5 V TN2-H-5 V TN2-H-6 V TN2-H-9 V TN2-H-12 V TN2-H-24 V TN2-H-48 V Nominal voltage, V DC 3 4.5 5 6 9 12 24 48 Pick-up voltage, V DC (max.) 2.25 3.38 3.75 4.5 6.75 9 18 36 Drop-out voltage, V DC (min.) 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8 Nominal operating current, mA (±10%) 46.7 31.1 28.1 23.3 15.5 11.7 8.3 6.25 Coil resistance, Ω (±10%) 64.3 145 178 257 579 1,028 2,880 7,680 Nominal operating power, mW 140 140 140 140 140 140 200 300 Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36 57.6 2. 1 Coil latching Part No. Standard PC board terminal TN2-L-3 V TN2-L-4.5 V TN2-L-5 V TN2-L-6 V TN2-L-9 V TN2-L-12 V TN2-L-24 V Self-clinching terminal TN2-L-H-3 V TN2-L-H-4.5 V TN2-L-H-5 V TN2-L-H-6 V TN2-L-H-9 V TN2-L-H-12 V TN2-L-H-24 V Nominal voltage, V DC 3 4.5 5 6 9 12 24 Set voltage, V DC (max.) 2.25 3.38 3.75 4.5 6.75 9 18 Reset voltage, V DC (max.) 2.25 3.38 3.75 4.5 6.75 9 18 Nominal operating current, mA (±10%) 33.3 22.2 20 16.7 11.1 8.3 6.3 Coil resistance, Ω (±10%) 90 202.5 250 360 810 1,440 3,840 Nominal operating power, mW 100 100 100 100 100 100 150 Max. allowable voltage, V DC 4.5 6.7 7.5 9 13.5 18 36 3. 2 Coil latching Part No. Standard PC board terminal TN2-L2-3 V TN2-L2-4.5 V TN2-L2-5 V TN2-L2-6 V TN2-L2-9 V TN2-L2-12 V TN2-L2-24 V Notes: 1. Specified value of the pick-up, drop-out, s.


TN2-L-H-3V TN2-L-H-48V TN2-L-H-4V


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)