Thermopile Detector
DATAS H E E T
p
Lighting | Imaging | Telecom
Thermopile Infrared Detectors
Thermopile Detector TPS 534
Large absorber s...
Description
DATAS H E E T
p
Lighting | Imaging | Telecom
Thermopile Infrared Detectors
Thermopile Detector TPS 534
Large absorber size high signal output
Low temperature coefficient of sensitivity Thermistor temperature reference included Applications in pyrometers, and - with additional infrared bandpass filters - in gas detectors
The TPS 534 thermopile sensor inTO 5 type housing employs a chip of 1.2 x 1.2 mm2 absorber size and a 30 kV thermistor as temperature reference.The round window opening is equipped with a 5.5 µm longpass (standard) infrared filter. The sensor shows a flat sensitivity characteristics over the wavelength.
Remark: The TPS 534 can also be equipped with infrared bandpass filters for NDIR gas detection.
Parameters
TPS 534
Sensitive area WIndow size DC Sensitivity Resistance
typical 1.2 x 1.2
3.8 20 40
units condition
mm2
absorbing area
mm diameter
V/W 500K BB, 5...14µm
kW 25°C
Noise
25 nV/ÖHz r.m.s. 300K, 1Hz
Right for modification reserved / WS /, 2....
Similar Datasheet