2-Phase Stepper-Motor Driver
2-Phase Stepper-Motor Driver
TLE4726G
Bipolar IC
Overview
Features • 2× 0.75 A / 50 V outputs • Integrated driver, con...
Description
2-Phase Stepper-Motor Driver
TLE4726G
Bipolar IC
Overview
Features 2× 0.75 A / 50 V outputs Integrated driver, control logic and
current control (chopper) Fast free-wheeling diodes Low standby-current drain Full, half, quarter, mini step
PG-DSO-24-13
Type TLE4726G
Ordering Code On Request
Package PG-DSO-24-13
Description
TLE4726G is a bipolar, monolithic IC for driving bipolar stepper motors, DC motors and other inductive loads that operate on constant current. The control logic and power output stages for two bipolar windings are integrated on a single chip which permits switched current control of motors with 0.75 A per phase at operating voltages up to 50 V.
The direction and value of current are programmed for each phase via separate control inputs. A common oscillator generates the timing for the current control and turn-on with phase offset of the two output stages. The two output stages in a full-bridge configuration have integrated, fast free-wheeling diodes and are free of crossover current. The logic is supplied either separately with 5 V or taken from the motor supply voltage by way of a series resistor and an integrated Z-diode. The device can be driven directly by a microprocessor with the possibility of all modes from full step through half step to mini step.
Data Sheet
1 Rev. 1.1, 2008-06-16
TLE4726G
Ι10 Ι11 Phase 1 OSC GND GND GND GND Q11 R1 + VS Q12
1 2 3 4 5 6 7 8 9 10 11 12
24 23 22 21 20 19 18 17 16 15 14 13
IEP00898
Ι 20 Ι21 Phase ...
Similar Datasheet