TOSHIBA LED Lamp InGaAP Red Light Emission
TLSU125,TLSU126
TOSHIBA LED Lamp InGaAℓP Red Light Emission
TLSU125, TLSU126
Panel Circuit Indicator
· · · · · · InGaAℓ...
Description
TLSU125,TLSU126
TOSHIBA LED Lamp InGaAℓP Red Light Emission
TLSU125, TLSU126
Panel Circuit Indicator
· · · · · · InGaAℓP red LED All plastic mold type TLSU125: Colorless clear lens TLSU126: Milky lusterless lens Suitable for high−brightness and low power consumption. All plastic molded lens, provides an excellent on−off contrast ratio. Applications: Backlight, light for decoration, switches, various indicator, personal equipment Unit in mm
JEDEC EIAJ TOSHIBA
― ― 4−4E1A
Maximum Ratings (Ta = 25°C)
Product TLSU125 TLSU126 Forward Current IF (mA) 30 30 Reverse Voltage VR (V) 4 4 Power Dissipation PD (mW) 72 72
Weight: 0.14 g
Operating Temperature Topr (°C) -30~85 -30~85 Storage Temperature Tstg (°C) -40~120 -40~120
1
2002-09-25
TLSU125,TLSU126
Electrical And Optical Characteristics (Ta = 25°C)
Product λp TLSU125 TLSU126 Unit 636 636 nm Typ. Emission Wavelength ∆λ 17 17 IF 20 20 mA Min 153 85 mcd Luminous Intensity IV Typ. 300 180 Forward Voltage VF Max 2.4 2.4 V Reverse Current IR Max VR 50 50 µA 4 4 V
IF 20 20 mA
Typ. 2.0 2.0
IF 20 20 mA
Precaution
· · · Please be careful of the followings Soldering temperature: 260°C max Soldering time: 3 s max
(Soldering portion of lead: Up to 2 mm from the body of the device) If the lead is formed, the lead should be formed up to 5 mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. This visible LED lamp also emits some IR light. If a photodetector is located near...
Similar Datasheet