75 OHM VIDEO LINE DRIVER
TK15404
75 Ω VIDEO LINE DRIVER FEATURES
s s s s s s Gain Set by External Components (6 dB typ.) Internal 75 Ω Driver Act...
Description
TK15404
75 Ω VIDEO LINE DRIVER FEATURES
s s s s s s Gain Set by External Components (6 dB typ.) Internal 75 Ω Driver Active High ON/OFF Control with Internal Pull-up Very Low Standby Current (typ. ISTBY ≤ 25 µA) Very Small SOT23-6 Package Single +5 V Power Supply Operation
APPLICATIONS
s s s s s s Video Equipment Digital Cameras CCD Cameras TV Monitors Video Tape Recorders LCD Projectors
DESCRIPTION
Operating from a single +5 V supply, the TK15404 is a single-channel video driver IC that takes a standard video signal as the analog input and provides a buffered analog output for driving a 150 Ω load (series 75 Ω resistor and 75 Ω cable load). The standard video input signal (1 VP-P) is typically amplified 6 dB using external components to produce a 2 VP-P signal into an AC-coupled 150 Ω load. During standby (Pin 1 grounded), the TK15404 consumes only 120 µW of power. Nominal power dissipation (no input) is typically 32 mW. The TK15404M is available in the very small SOT23-6 surface mount package.
TK15404
STANDBY OUTPUT -INPUT
VCC GND +INPUT
01 S
BLOCK DIAGRAM
VCC
75 Ω DRIVER
ORDERING INFORMATION
TK15404M
STANDBY GND
Tape/Reel Code
TAPE/REEL CODE
TL: Tape Left
January 2000 TOKO, Inc.
Page 1
TK15404
TK15404M ABSOLUTE MAXIMUM RATINGS
Supply Voltage ........................................................... 6 V Operating Voltage ......................................... 4.5 to 5.5 V Power Dissipation (Note 1) ............................... 150 mW Storage Temperat...
Similar Datasheet