75 OHM VIDEO LINE DRIVER
TK15409
75 Ω VIDEO LINE DRIVER FEATURES
s Internal Y-C Summing Circuit s Voltage Gain is 6 dB Fixed s Internal 75 Ω Driv...
Description
TK15409
75 Ω VIDEO LINE DRIVER FEATURES
s Internal Y-C Summing Circuit s Voltage Gain is 6 dB Fixed s Internal 75 Ω Driver s Active High ON/OFF Control s Very Low Standby Current (typ. ISTBY ≤ 25 µA) s Very Small Output Capacitor Using SAG Function Pin s Very Small Package (SOT23L-8) s Single +5 V Power Supply Operation
APPLICATIONS
s s s s s s Video Equipment Digital Cameras CCD Cameras TV Monitors Video Tape Recorders LCD Projectors
DESCRIPTION
Operating from a single +5 V supply, the TK15409 is a video line driver IC that takes standard Y and C analog inputs and provides a composite analog output for driving 150 Ω loads (75 Ω resistor and 75 Ω cable load). Internal summing of the Y and C inputs is performed to produce the composite video output. The luminance (Y) input is clamped at 1.25 V and amplified 6 dB; the chromanance (C) input is biased at 2.0 V and amplified 6 dB. The internal 1.5 kΩ SAG function resistor provides gain compensation for low frequency signals. During standby (Pin 5 grounded), the TK15409 consumes only 127 µW of power. Nominal power dissipation (no input) is typically 90 mW. The TK15409M is available in the very small SOT23L-8 surface mount package.
Clamp 1.25 V 6 dB Amp
TK15409
Y-INPUT
C-INPUT
N/C
01S
VCC GND
SAG
OUTPUT
STANDBY
BLOCK DIAGRAM
BIAS 2.0 V 6 dB Amp
5 kΩ
Clamp 1.25 V
ORDERING INFORMATION
1.5 kΩ
6 dB 75 Ω DRIVER
5 kΩ
Reference & Standby
TK15409M
Tape/Reel Code
TAPE/REEL CODE
TL: Tape Left
January 2000 TOKO, Inc.
VCC
...
Similar Datasheet